Kenmore 16677 Service Manual - Page 10

To Adjustthe, Needle, Height

Get Kenmore 16677 - Serger Sewing Machine PDF manuals and user guides View all Kenmore 16677 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

TO ADJUSTTHE NEEDLE HEIGHT CORRECT SETTING: THE DISTANCE BETWEEN THE TIP OF NEEDLE ON THE RIGHT AND THE SURFACE OF NEEDLE PLATE SHOULD BE 11.6 TO 12.2 MM WHEN THE NEEDLE BAR IS AT ITS HIGHEST POSITION. TO ADJUST: 1. REMOVE THE LOOPER COVER UNIT, FACE PLATE UNIT, BACK COVER UNIT, TOP COVER AND FRONT COVER UNIT. 2. TURN THE HANDWHEEL TOWARD YOU AND SET THE NEEDLE BAR AT ITS HIGHEST POSITION. 3. LOOSEN SETSCREW (A) TO ADJUST THE HEIGHT, AND TIGHTEN SETSCREW (A) AFTER THE ADJUSTMENT IS DONE. 4.TURN THE HANDWHEEL TOWARD YOU ONE CYCLE, AND RECHECK THE NEEDLE BAR HEIGHT. 5. ATTACH THE FRONT COVER UNIT, LOOPER COVER UNIT, TOP COVER, BACK COVER UNIT AND FACE PLATE UNIT. SETSCREW (A) SURFACE OF NEEDLE PLATE \ 11.6TO 12.2 MM ! 1.6 MM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
TO ADJUSTTHE
NEEDLE
HEIGHT
CORRECT
SETTING:
THE DISTANCE BETWEEN THE
TIP
OF NEEDLE ON THE RIGHT AND
THE
SURFACE OF NEEDLE
PLATE SHOULD BE 11.6 TO 12.2 MM WHEN THE NEEDLE BAR IS AT ITS HIGHEST POSITION.
TO ADJUST:
1. REMOVE THE LOOPER COVER UNIT, FACE PLATE UNIT, BACK COVER UNIT, TOP COVER
AND FRONT COVER UNIT.
2. TURN THE HANDWHEEL TOWARD YOU AND SET THE NEEDLE BAR AT ITS HIGHEST
POSITION.
3. LOOSEN SETSCREW
(A) TO ADJUST THE HEIGHT, AND TIGHTEN SETSCREW
(A) AFTER
THE ADJUSTMENT
IS DONE.
4.TURN THE HANDWHEEL TOWARD YOU ONE CYCLE, AND RECHECK THE NEEDLE BAR
HEIGHT.
5. ATTACH THE FRONT COVER UNIT, LOOPER COVER UNIT, TOP COVER, BACK COVER
UNIT AND FACE PLATE UNIT.
SETSCREW
(A)
SURFACE OF NEEDLE
PLATE
\
11.6TO 12.2 MM
! 1.6 MM