Kenmore 16677 Service Manual - Page 23

To Adjust, The Timing, Of The, Upper And Lower Loopers

Get Kenmore 16677 - Serger Sewing Machine PDF manuals and user guides View all Kenmore 16677 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

TO ADJUST THE TIMING OF THE UPPER AND LOWER LOOPERS CORRECT SETTING: WHEN THE LOWER LOOPER MOVES TO THE RIGHT, THE TIP OF UPPER LOOPER MEETS THE LOWER LOOPER WITHIN 0.2 TO 1.2 MM FROM THE LEFT OF LOWER LOOPER EYE AS SHOWN IN FIG. 1. TO ADJUST: 1. BEFORE PROCEEDING WITH THIS ADJUSTMENT, CHECKTHE LOWER LOOPER TIMING AND POSITION OF UPPER LOOPER. 2. REMOVE THE MACHINE BASE. 3. LOOSEN TWO SETSCREWS, AND ADJUST THE TIMING BY TURNING THE UPPER LOOPER DRIVE CAM IN THE DIRECTION OF: (A): IF THE TIMING OF UPPER LOOPER IS ADVANCED AS SHOWN IN FIG. 3. (B): IF THE TIMING OF UPPER LOOPER IS DELAYED AS SHOWN IN FIG. 4. THE ALLOWANCE IS O.2TO 1.2 MM FROM THE LEFT EDGE OF LOWER LOOPER EYE AS SHOWN IN FIG. 1. 4. TIGHTEN TWO SETSCREWS. 5. CHECK THE CLEARANCE BETWEEN THE LOOPERS. 6. ATTACH THE MACHINE BASE. LOWER (FIG. 1) R LOOPER (FIG. 2) \ (FIG. 4) SETSCREWS MARKING-OFF LINE UPPER LOOPER DRIVE CAM 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
TO ADJUST
THE TIMING
OF THE
UPPER AND LOWER LOOPERS
CORRECT SETTING:
WHEN THE LOWER LOOPER MOVES TO THE RIGHT, THE TIP OF UPPER LOOPER MEETS
THE
LOWER LOOPER WITHIN 0.2 TO 1.2 MM FROM THE LEFT OF LOWER LOOPER EYE AS SHOWN IN
FIG. 1.
TO ADJUST:
1. BEFORE PROCEEDING WITH THIS ADJUSTMENT, CHECKTHE
LOWER LOOPER TIMING AND
POSITION OF UPPER LOOPER.
2. REMOVE THE MACHINE BASE.
3. LOOSEN TWO SETSCREWS, AND ADJUST THE TIMING BY TURNING THE UPPER LOOPER
DRIVE CAM IN THE DIRECTION OF:
(A):
IF THE TIMING OF UPPER LOOPER IS ADVANCED AS SHOWN IN FIG. 3.
(B):
IF THE TIMING OF UPPER LOOPER IS DELAYED AS SHOWN IN FIG. 4.
THE ALLOWANCE IS O.2TO 1.2 MM FROM THE LEFT EDGE OF LOWER LOOPER EYE AS SHOWN
IN FIG. 1.
4. TIGHTEN TWO SETSCREWS.
5. CHECK THE CLEARANCE BETWEEN THE LOOPERS.
6. ATTACH THE MACHINE BASE.
LOWER
R LOOPER
(FIG. 1)
\
(FIG.
2)
(FIG. 4)
SETSCREWS
MARKING-OFF
LINE
UPPER LOOPER DRIVE CAM
21