Kenmore 16677 Service Manual - Page 15

To Adjust, The Height, The Lower, Looper

Get Kenmore 16677 - Serger Sewing Machine PDF manuals and user guides View all Kenmore 16677 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

TO ADJUST THE HEIGHT OF THE LOWER LOOPER CORRECT SETTING: THE HEIGHT OF LOWER LOOPER IS 65.7 MM FROM CENTER OF LOWER LOOPER SHAFT AS ILLUSTRATED BELOW. TO ADJUST: 1. SET THE UPPER KNIFE IN DOWN POSITION TO LOOSEN SETSCREW (A). 2.TURN THE HANDWHEELTO GETTHE LOWER LOOPER IN ITS LEFTMOST POSITION. 3. PLACE THE GAUGE ON THE LOWER LOOPER SHAFT AS SHOWN. 4. LOOSEN SETSCREW (A), AND MOVE THE LOWER LOOPER UP OR DOWN TO GET THE TIP OF LOWER LOOPER IS IN LINE WITH GUIDE LINE OF GAUGE. 5. TIGHTEN SETSCREW (A). 6. REMOVE THE GAUGE AND SET THE UPPER KNIFE IN UP POSITION. SETSCREW (A) LOWER LOOPER UNII GUIDE LINE OF GAUGE am JGE NO.787-G01 ) LOWER LOOPER THREAD GUIDE LOWER LOOPER SHAFT 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
TO ADJUST
THE HEIGHT
OF
THE LOWER
LOOPER
CORRECT
SETTING:
THE HEIGHT OF LOWER LOOPER IS 65.7 MM FROM CENTER OF LOWER LOOPER SHAFT AS
ILLUSTRATED BELOW.
TO ADJUST:
1. SET
THE
UPPER KNIFE IN DOWN POSITION TO LOOSEN SETSCREW
(A).
2.TURN THE HANDWHEELTO
GETTHE
LOWER LOOPER IN ITS LEFTMOST POSITION.
3. PLACE THE GAUGE ON THE LOWER LOOPER SHAFT AS SHOWN.
4. LOOSEN SETSCREW
(A), AND MOVE THE LOWER LOOPER UP OR DOWN TO GET THE TIP OF
LOWER LOOPER IS IN LINE WITH GUIDE LINE OF GAUGE.
5. TIGHTEN SETSCREW (A).
6. REMOVE THE GAUGE AND SET THE UPPER KNIFE IN UP POSITION.
SETSCREW
(A)
GUIDE LINE OF GAUGE
am
JGE
NO.787-G01
)
LOWER LOOPER
UNII
LOWER LOOPER THREAD GUIDE
LOWER LOOPER SHAFT
13