Kenmore 2029319 Use and Care Manual - Page 16

Warning, Kwarning

Page 16 highlights

MOTOR SAFETY FILTER CLEANING WARNING Electrical Shock Hazard Turn off and unplug vacuum cleaner from electrical outlet. Do not operate the vacuum cleaner without the motor safety filter,, Be sure the filter is dry and properly installed to prevent motor failure and!or electrical shock. JUIUJIJIHUI,nl Check motor safety filter occasionally and clean when dirty. l oRemove the bag as outlined in the BAG CHANGING section 3. Wash filler in warm soapy water, rinse, then dry, Do not clean in dishwasher or install while damp. ._j_i_._._._ ___ '_.....4b.y Rselidpi,nagceit tbhaeckfilteinrto place under the ribs __ in the bag cavity _-'_'q"_ j !llt_l_,:{_[_ Tuck filter in so that it _#._,rs,_ fits completely under _)tai_er_ -_ the rubber retainer. 5. Replace the bag as outlined in the BAG CHANGING section,, 2. Lift the rubber retainer and pull out motor safety filter as shown EXHAUST FILTER CHANGING kWARNING Fire andlor Electrical Shock Hazard Do not operate with a clogged exhaust filter or without the exhaust filter or exhaust filter cover installed. 2oPull the exhaust filter cartridge up and out from the rear of the canister HEPA EXHAUST FILTER The exhaust filter cartridge must be replaced when dirty Replace the filter when the entire surface area is covered evenly, The filter CANNOT be washed as it will lose its dust trapping ability. NOTE: See PARTS AND FEATURES for Exhaust Filter number_ t, Pull out and up on the exhaust filter cover to remove from the canister and lay aside,, 3. Replace exhaust filter cartridge, Place the new filter cartridge into the Filte_ canister with the foam seal facing down towards the canister Tabs 4. Replace the exhaust filter cover by placing the two tabs on the filter cover into the slots on the canister and rotate into place until it snaps closed. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

MOTOR
SAFETY
FILTER
CLEANING
WARNING
Electrical
Shock Hazard
Turn off
and
unplug vacuum cleaner
from electrical
outlet.
Do not operate
the vacuum cleaner without the motor
safety filter,, Be sure the filter is dry and
properly installed to prevent motor
failure
and!or electrical shock.
JUIUJIJIHUI,nl
Check motor
safety filter
occasionally
and clean when dirty.
l oRemove the bag as outlined in the
BAG
CHANGING
section
2. Lift
the
rubber
retainer and pull
out motor safety filter
as shown
3.
Wash filler in warm soapy water, rinse,
then dry,
Do not clean
in
dishwasher
or
install
while
damp.
._j_i_._._._
'_
4. Rep,ace the filter
.....
by sliding it back into
___
place under the ribs
__
in the bag cavity
_-'_'q"_ j !llt_l_,:{_[_
Tuck filter
in
so that it
_#._,rs,_
fits completely under
_)tai_er_
-_ the rubber retainer.
5.
Replace the bag as outlined in the BAG
CHANGING
section,,
EXHAUST
FILTER
CHANGING
kWARNING
Fire andlor
Electrical
Shock Hazard
Do not operate
with
a clogged
exhaust
filter
or without
the exhaust
filter
or
exhaust
filter
cover installed.
HEPA EXHAUST
FILTER
The exhaust filter cartridge must be
replaced when dirty
Replace the filter when
the
entire surface area is covered evenly,
The filter
CANNOT be washed
as
it
will
lose its dust trapping
ability.
NOTE: See PARTS AND FEATURES for
Exhaust Filter number_
t,
Pull out and
up on the
exhaust filter
cover to remove
from the
canister
and
lay
aside,,
16
3. Replace exhaust
filter cartridge,
Place the new filter
cartridge
into the
canister with the
foam seal facing
down towards
the
canister
Tabs
2o
Pull the exhaust
filter cartridge up
and out from the
rear of the
canister
Filte_
4. Replace the
exhaust filter cover
by placing the two
tabs on the filter
cover
into
the slots
on
the
canister and
rotate into place
until it snaps
closed.