Kenmore 2029319 Use and Care Manual - Page 8

CANISTER 1. Open the canister hood 2. Check to see that the dust bag is properly installed See BAG CHANGING for instructions 3. Check to see that the motor safety filter is properly installed. See MOTOR SAFETY FILTER CHANGING for instructions HOSE 1. Line up the hose latch tab and notch in canister hood and insert hose into canister until it snaps in place° Latch Tab Notch HOOD AND TOOL STORAGE COVER It is normal for the canister hood and tool slorage cover to come off when opened further than needed. Line up the hinge slots, insert the hinges into the slots, and close the hood and tool storage cover to reinstall. To remove: Lift hose latch tab upward and pull up on hose Handle Lock Handle Q.ick Release._ 2. Insert handle into wand until lock button snaps in place. Be sure hose is not twisted. To remove: Press handle quick release button and pull up on handle CAUTION Never open canister hood with the tool storage cover open. This wilt help to prevent damage from occurring to the canister hood andlor tool storage cover, To store: Disconnect hose from wands and canister to prevent stress on hose during storages. Store hose in a loosely coiled position so the hose covering is not stressed