Kenmore 2029319 Use and Care Manual - Page 18

TO CLEAN AGITATOR: NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacuum cleaner, the agitator must be cleaned every_ time the belt is changed The agitator must also be cfeaned according to the following schedule: Vacuum Cleaner Use HEAVY (used daily) MODERATE _ (used 2-3 times/week) LIGHT (used 1 timetweek) Clean Agitator every week every month every 2 months IMPORTANT Disconnect vacuum cleaner from electrical outlet. Check and remove hair, string and lint buitd-up frequently in the Power-Mate agitator and end cap areas Remove any dirt or debris in the belt path area or in the brush roller area,, Carefully remove any string or debris located on the agitator or end caps., AGITATOR ASSEMBLY _ Endt Cap Belt Path q LIGHT BULB CHANGING I 1,,Remove Power-Mate cover as shown in BELT CHANGING AND AGITATOR CLEANING section. 2,, Push in and turn bulb counterclockwise, then puU out to remove, _:_/_rn I / 3b.utPbucsfhociln_wanisde,ttuorn not be higher than 15 Watts(t30 Volts), _ eplace Bulb must 4,,Reinstall Power-Mate cover as shown in BELT CHANGING AND AGITATOR CLEANING section., NOTE: See PARTS AND FEATURES for bulb number, 18