Kenmore 2029914 Use and Care Manual - Page 18

Exhaust, Filter, Changing

Page 18 highlights

EXHAUST FILTER CHANGING WARNING Fire andlor Electrical Shock Hazard Do not operate with a clogged exhaust filter or without the exhaust filter installed° Do not operate without filter cover installed. iJ J EXHAUST FILTER HEPA The exhaust filter cadridge must be replaced when dirty, Replace the filter when the entire surface area is covered evenly, The filter CANNOT be washed as it will lose its dust trapping ability_ NOTE: See PARTS AND FEATURES for exhaust filter number, Exhaust 5oTo replace the exhaust filter cover place the two tabs on the filter cover into the slots on the canister, 4. Replace the exhaust filter cartridge.. Place the new filter into the canister with the foam seal towards the canister, 1,, Press latch down to release the exhaust filter cover from slot in canister., rotate filter cover into place.. 2, Pull filter cover outward to remove from canister / 7. Release latch and verify that filter cover is locked into place,. 3o Remove the exhaust filter using the recess as shown 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

EXHAUST
FILTER
CHANGING
WARNING
Fire andlor Electrical
Shock Hazard
Do
not operate with
a clogged exhaust
filter
or without
the
exhaust
filter
installed° Do
not
operate without filter
cover
installed.
iJ
J
EXHAUST
FILTER
HEPA
The exhaust filter cadridge must be
replaced
when dirty,
Replace the filter
when the entire surface area is covered
evenly, The filter
CANNOT be washed
as
it
will
lose its dust trapping
ability_
NOTE: See PARTS AND
FEATURES
for
exhaust filter number,
1,, Press latch
down
to release
the
exhaust filter
cover from slot
in
canister.,
2,
Pull filter
cover outward
to
remove from
canister
/
3o Remove the
exhaust filter
using
the
recess
as shown
Exhaust
4. Replace the
exhaust filter
cartridge.. Place
the new filter into
the canister with
the foam
seal
towards
the
canister,
5oTo replace the
exhaust filter
cover place the
two tabs on the
filter cover into
the slots on the
canister,
rotate filter cover
into place..
7.
Release latch and verify that filter cover
is locked into place,.
18