Kenmore 4045 Use and Care Guide - Page 7

Control Pad Features Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide• READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below• FEATURE INDICATOR LIGHTS-- These light to show which feature is in use. STOP CLEAR PAD-- Used to clear any function previously entered except the time of day and minute timer. Press STOP CLEAR to stop cooking. Also the STOP CLEAR pad is used to activate oven I_ckout setting. \ UP and DOWN ARROWS PADS Used along with the function pads to select oven temperature, cook time, start time (when programming an automatic start time), time of day, clean time and minute timer. CLOCK SET PAD Used to set the time of day. COOK TIME PAD Used to enter the length of the baking time. BAKE PAD--Used to select the bake function. BROIL PAD-- Used to select the variable broil function. ® ® ® Q Oven Q Preheat • ® STOP TIME PAD Used to set the desired stop time for baking. May be used with COOK TIME to program a delayed bake cycle, / SELECT CLEAN PAD Used to select the Self- Cleaning cycle. A 2 or 3 hours Self-Clean time may be selected. Q Doer Locked I OVEN, PREHEAT & DOOR LOCK LIGHTS* The "Oven" light will glow each time the oven unit turns on to maintain the set oven temperature. The "Preheat" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "Door Locked" light will flash until the door locks when the self-clean cycle is in use. It glows constantly after the door locks. \ TIMER SET/OFF PAD Used to set or cancel the minute timer. The minute timer does not start or stop cooking. Also, TIMER SET/OFF Pad is used to set the Continuous Bake Featu re. *Note: The OVEN indicator light on the electronic display wi!l turn ON and OFF when using the Bake feature and during preheati This is normal and indicates that the oven is cycling t0 maintain the selected baking temperaturel Whe n the preheat indicator light turns OFF, your oven is ready. For a silent control panel When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for silent operation• Press and hold _,_,_After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pressed• To return the sound, press and hold' _,,_ again for 7 seconds until the control beeps once. Note: The control will return to the audible mode after a power outage. Temperature conversion The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C). To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode): 1 Press "-- --" appears in the display. 2. Press and hold the A until "HI" appears in the display. 3. Press and hold _il until °F or oC appears in the display. 4. Press the A or V to change °Fto °C or °C to °F. 5. Press any control pad to return to normal operating mode.