Kenmore 4045 Use and Care Guide - Page 8
Setting
View all Kenmore 4045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting Oven Controls 0 F:_ 3 sec q..i ® ® Oven O Preheat ®OoerLocked o Stop Time Note: The time 0f day must first be Setin order t0 operate the oven: To Set the Clock When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00". 1. Press once (do not hold pad down). 2. Within 5 seconds, press and hold the A or V until the correct time of day appears in the display. Note: The clock cannot be changed during any timed bake or Self-Clean cycle. To Set the Minute Timer: 1 Press ;Timer • Set/Off • 2. Press the A to increase the time in one minute increments• Press and hold the _to increase the time in 10 minute increments• The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes• Note: If the V pad is pressed first, the timer will advance to 11 hours and 59 minutes• 3. The display shows the timer countdown in minutes until 1 minute remains• Then the display will countdown in seconds• 4. When the set time has run out, the timer will beep 3 times, it will then continue to beep 3 times every 60 seconds until Tm, o, Set/0ff is pressed. Note: The indicator light located above the 'Tm,o,_psaod,0ewill glow while the minute timer is active. Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function. To Change the Minute Timer while it is in use: While the timer is active and shows in the display, press and hold the _ or V to increase or decrease the time. To Cancel the Minute Timer before the set time has run out: Press Set/0fl Note:T0 turn the time of day display OFF or ON in the disPlaY press and h01d fOr ! 5 Seconds (the c0ntr01 will beep once) and then release_ This feature does not remove the set time of day from the memory of the control, When the display iS turned OFF the time of day will re,appear for a few seconds anY t!me the IIQ pad iStouche& 8