Kenmore 4045 Use and Care Guide - Page 9
Setting, cont'd
View all Kenmore 4045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Setting Oven Controls (cont'd) To Set or Change the Temperature for Baking The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). To Set the Controls for Baking: 1 Press _. " "' appears in the display. 2. Within 5 seconds, press the ,/_ or V. The display will show "350°F (177°C)." By pressing and holding the A or V, the temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius). 3. As soon as the A or V pad is released, the oven will begin heating to the selected temperature. When the displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF and the control will beep 3 times. 4. To cancel baking, press To Change the Oven Temperature after Baking has Started: 1 Press _ and make sure the bake temperature is displayed, 2. Press the _ or V pad to increase or decrease the set temperature• To Set Control for Continuous Bake or 12 Hour Energy Saving The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 5g minutes. The oven can be programmed to override this feature for continuous baking. To set control for continuous baking: 1 • Press and hold Set/Off down for 5 seconds until tone is heard, " -- -- hr" will appear in display for continuous cooking. The current time of day will return to the display. 2. To cancel the Continuous Bake function, press T.,O,,aon,_d0,h,old for 5 seconds until tone is heard. "12hr" will appear in display indicating that the control has returned to the 12 Hour Energy Saving feature. To Set Control for Oven Lockout The control can be programmed to lock the oven door and lockout the oven control pads. To set Control for Oven Lockout feature: 1. Press and hold for 3 seconds. "Loc" will appear in display, the "Door Locked" indicator light will flash and the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display. 2. To cancel the Oven Lockout feature, press resume normal operation. and hold for 3 seconds. The control will unlock the oven door and