Kenmore 4804 Use and Care Guide - Page 28
Oven Temperature
![]() |
View all Kenmore 4804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Self=Cleaning iNSTRUCTiONS When the Self-Clean Cycle is Completed 1. The time of day, the "DOOR LOCKED", "CLEAN" and "HOT" icon will remain in the display. 2. Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened. Stopping or interrupting a Self-Cleaning Cycle If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven: 1. Press _). 2. Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened (Fig. 1). PRESS Adjusting Oven Temperature The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed. INSTRUCTIONS PRESS To adjust the oven temperature higher 1. Press _ for 6 seconds (Fig. 2), G 2, To increase the temperature use the number pads to enter the desired change. (Example 30°F) _ (_) (Fig. 3). The temperature may be increased as much as 35°F (19°C). 3. Press _ to accept the temperature change and the display will return to the time of day (Fig. 4). Press ___ to reject the change if necessary. To adjust the oven temperature lower 1. Press _ for 6 seconds (Fig. 4). 2. To decrease the temperature use the number pads to enter the desired change. (Example-30°F) (_ (_ and then press @ (Fig. 6). The temperature may be decreased as much as 35°F (19°C). 3. Press _ to accept the temperature change and the display will return to the time of day (Fig. 7). Press _i) to reject the change if necessary. G (]D@ 28 DISPLAY Note: The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature. DISPLAY Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7
![](/manual_guide/products/kenmore-4804-use-care-guide-8806839/28.png)