Kenmore 4804 Use and Care Guide - Page 8
Press, Z @ pads, tosethe, timeofday, to1:30/Fig
![]() |
View all Kenmore 4804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting the Oven Controls Setting the Clock The _'_ pad is used to set the clock. The clock may be set for 12 or 24 hour time of v day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash (See Fig. 1). INSTRUCTIONS PRESS To set the clock (example below for 1:30) 1. Press _. "CLO" will appear in the display (Fig. 2). 2 Pres_s (Z) @ padtsosethetimeofdayto1:30/Fig Q OQ@ Fig. 1 DISPLAY Fig. 2 3). Press _.ARj_. "CLO" will disappear and the clock will start (Fig. 4). Changing between 12 or 24 hour time of day display 1. Press and hold _ for 7 seconds until "12h" or "24h" appears in the display. 2. Press @ to switch between the 12 and 24 hour time of day display. "12h" (Fig. 5) or "24h" (Fig. 6) will be displayed. 3. Press _ART"_to accept the change or press (_ to reject the change. 4. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours. Q for 7 seconds @ (_or Fig. 3 Fig. 4 Fig. 5 Fig. 6 Setting Silent Control Operation The DELAYTIME @ and FLEX CLEAN @ pads control the Silent Control operation feature, The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps, INSTRUCTIONS PRESS DISPLAY To change control from normal sound operation to silent control operation 1. To tell if your range is set for normal or silent operation press and hold @ for 7 seconds (Fig. 7). @ for 7 seconds Fig. 7 2. Press @ to switch between normal sound operation and silent operation mode. The display will show either "SP" (Fig. @ 8) or "--" (Fig. 9). If "SP" appears (Fig. 8), the control will operate with normal sounds and beeps. If % -" appears (Fig. 9), the control is in the silent operation mode. Fig. 8 3. Press _ change. to accept the change or press _ to reject the Fig. 9
![](/manual_guide/products/kenmore-4804-use-care-guide-8806839/8.png)