Kenmore 4813 Use and Care Guide - Page 11

Consumer Defined Control Features Setting Temperature Display = Fahrenheit or Celsius The BROIL _ and FLEX CLEAN _ pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius, The oven has been preset at the factory to display in Fahrenheit. Note: both ovens will be changed at the same time, iNSTRUCTiONS To change display from Fahrenheit Celsius to Fahrenheit to Celsius or 1. Press _ and hold for 7 seconds. A beep will sound, "550" v will appear "UPPER" and "BROIL" will flash in the display (Fig. 1). After 6 seconds a beep will be heard and "F" (Fig. 2) or "C" (Fig. 3) will appear in the display. If "F" appears, the display is set to show temperatures in Fahrenheit (Fig. 2). If "C" appears, the display is set to show temperatures in Celsius (Fig. 3). 2. Press @ to switch between Fahrenheit or Celsius display modes. The display will show either "F" (Fig. 2) or "C" (Fig. 3). PRESS O for 7seconds DISPLAY Fig. 1 Fig. 2 Fig. 3 3. Press _'TARTt_o accept the change or press _T%_to reject the v v change. 11