Kenmore 75251 Owners Manual - Page 4

OBSERVAELL LOCAL CODES AND ORDINANCES, DO NOT_ UNDER ANY CIRCUMSTANCE& REMOVE THE POWER SUPPLY CORD GROUND PRONG. ELECTRICAL GROUND iS REQUIRED ON THIS APPLIANCE. For 230/208 volt 60 Hz, AC only, 15A fused and properly grounded dectrica] supply is required. A time delay fuse or time delay circuit breaker is recommended Use a dedicated circuit, sewing only this appliance_ DO NOT USE AN E_ENSION CORD. 115V _ 230V _ i, NOTE: The shape may be different accordhg to its mo_]. Use Wall Receptacle Power Supply St_ds_d 125V, 3-wire grounding receptacle rated 15A, 125V AC Standard 250V, 3-wire grounding r_placle ral_] 15A, 250V AC Use 15 AMP time delay fuse or 15 AMP, citcuil b[eaker, Standard 250V, 3-wire grounding r÷_placle raled 20A, 250V AC Use 20 AMP time deiay fuse or 20 AMP, c _cuit breaker, RECOMMENDED GROUNDING M_HOD For your persona]safety,thisapCance must _ grounded This app]ian_ has a powersupply cord with a 3-prong grounding plug. To minimizepossible shock hazard, the ®rd must be pluggedintoa mating groundingtype wall receptade and grounded in acoord_ce with the National ElectricalCode (ANS[CNFPA70} latestedition and all local codes and ordinals. If a mating wall receptade is not available, _ is the personalres_nsibility and obiigalion of the customerto have a properlygrounded3-prong wali rece)tade instail_ by a qualifiedd_dciaq. Power _rd may include a current interrupter device. A test _d reset button is provided on the #ug case. The device shodd be tested on a periodicbasis by first pressingthe TEST button _d then the RESET button.If the TEST bu_ton does not trip or ifthe RESETbutton will not stay engaged, discontinue use ofthe air conditioner and contact a qualified servicet_hn[cian Electrical Shock Hazard Plug into a grounded 3 prong outbt. Do not remove ground prong Do not use an adapter, Do not use an extension cor& Failure to follow the_ instructions c_ death, fire, or electrical sh_k. result in You can choose between two methods bdow according to your window sill shape and preference. USING SLIT "A" Fasten the stopper using 2 screw holes, and lead out the power _rd through siit "A'_ USING SLIT "B" Fasten the stopper using left _rew hole, and rotate properly to lead the _wer cord out through silt "B". _f -4-