Kenmore 84008 Use and Care Manual - Page 12

1. After fryer and oil have cooled completely, carefully lift control assembly out of fryer and wipe with a damp cloth to clean. NEVER immerse the controt assembly in water or wash in a dishwasher. Carefully lift pot of cooled oil out of base. If you plan to reuse the cooking oil, it is recommended that you strain the Oil to remove any food particles. Store the oil in a tightly sealed container and keep where it will not be exposed to air or direct light. 3, Wash the removable pan, frying basket(s), fryer cover, and base in dishwasher or in warm, sudsy water. Do not use steel wool scouring pads o[ abrasive kitchen cleansers on the removable pan, cover or base and do not use bleaching agents to clean the frying baskets. If desired, the basket handles may be removed for cleaning. The handle is force-fitted around the "LOCK" plate. To remove, pull the handle forward into the basket. Squeeze together the handle bars so the pegs on the bottom come out of the toops on the side of the basket (see Fig 3, pg. 6). After cleaning, reattach handle, making sure both pegs are in loops on basket. Instead of pushing handle bars up and force-fitting around "LOCK" plate, leave the handles in the forward position down in the basket for storage, f NOTE: Your fryer has a grease filter in the cover. The filter does not need replacing. 4. To clean the permanent grease filter, lift out of cover and wash in hot sudsy water, or in dishwasher, A soft bristled brush is recommended. Keep the 1-ply layers inside the filter holder when cleaning. 5. Before reassembling unit, make sure afl parts are completely dry. 6. Always check magnetic plug before use to assure no metal items have become attached to the magnet. 12