Kenmore 84008 Use and Care Manual - Page 7

Attach, controt, assembly, tothebase, byaligning, tabsoncontrol, withouter

Get Kenmore 84008 - Programmable Deep Fryer PDF manuals and user guides
UPC - 836607001559
View all Kenmore 84008 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

4.Attacchontraost sembtolythebasbeyaligninthgetwotabsoncontroalssembly withoutertwo slots on fryer base (see Fig. 4), SIide control assembly down as far as it wii! go, making sure that both tabs are in the slots, and heating element is in bottom of pan. NOTE: The fryer will only operate when both tabs are fully in place in the slots. FIG,4 Tabs !!?iiii 5, FitI pan with cooking oil.The amount of oil used must be between the minimum and maximum teveis on the inside of pan, The fryer takes approximately 4 quarts of oil, NEVER exceed the maximum IeveI of oil. 6. Attach the cord to the unit by aligning the magnetic plug end with the 3 electrical pins on the back of the control unit. The ptug has a ledge on it which must be facing down. Angle the plug so the ledge is in first, then push in rest of plug, FIG. 5 IMPORTANT: The magnetic cord was designed to detach easily from the fryer. As a result, if it is bumped or touched during use it could possibly detach, causing the unit to stop heating. Avoid contact with cord during operation. If contact occurs, verify that 1he cord is still properly connected. Unit will need to be reprogrammed,

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
4.Attach
controt
assembly
tothebase
byaligning
the
two
tabsoncontrol
assembly
withouter
two
slots on fryer base (see Fig. 4),
SIide control
assembly
down
as far as it wii! go, making sure that both tabs are in the slots, and heating
element
is in bottom
of pan. NOTE: The fryer
will
only
operate
when
both
tabs
are fully
in
place
in
the
slots.
FIG,4
Tabs
!!?iiii
5,
6.
FitI
pan with cooking
oil.The
amount
of oil used must be between
the minimum
and
maximum
teveis
on the
inside of pan,
The
fryer takes
approximately
4 quarts
of oil, NEVER
exceed the maximum
IeveI of oil.
Attach
the cord to the unit by
aligning
the magnetic
plug end
with the 3 electrical
pins on the
back
of the control
unit. The
ptug has a ledge on it which
must be facing
down. Angle
the
plug so the ledge is in first,
then
push in rest of plug,
FIG. 5
IMPORTANT:
The magnetic cord was designed
to
detach
easily
from
the fryer. As a result, if it
is
bumped
or touched
during
use it could
possibly
detach, causing
the unit to stop heating. Avoid contact
with cord during
operation.
If contact
occurs, verify that 1he cord
is
still properly
connected.
Unit will need to be reprogrammed,