Kenmore 9747 Use and Care Guide - Page 13
Kenmore 9747 - Elite 30 in. Electric Range Manual
View all Kenmore 9747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setting Oven Controls • • Setting the Clock Changing between 12 or 24 hour display Setting the Clock The CLOCK _-Q} pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash the time of day (Fig. 1). Fig. 1 INSTRUCTIONS To set the clock (example 1. 2. Press @. Press @ PRESS for 1:30): DISPLAY below "CLO" will appear in the display (Fig. 2). @ @ pads to set the time of day to 1:30(Fig. 3). Press _. "CLO" will "CLO" will appear in the display. @ ®@@ @ for6seconds Fig. 2 disappear and the clock will start (Fig. 4). Fig. 3 Changing 1. between 12 or 24 hour time of day display: Press and hold _'Q} for 6 seconds (Fig. 3). While holding the pad down the current time of day will remain and "CLO" will disappear from the display (Fig. 4). CONTINUE holding the pad until a beep is heard. Fig. 4 2. 3. The display will show either "12h"(Fig. 5) or"24h"(Fig. 6). Clean Press c;'i, to switch between the 12 and 24 hour time of day Fig. 5 display. The display will show either "12h" (Fig. 5) or "24h" (Fig. 6), 4. Press _ to accept the desired change or press @ to Fig. 6 reject the change. 5. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours. Using the Air Guard TM feature Your appliance is equipped with a catalytic oven exhaust cleaner that may be turned on during any active cooking process. This feature helps remove smoke and eliminates 85% of the odors generated when using your oven. If you wish to have Air Guard TM clean the oven exhaust once cooking has started, press the @ TM key. Note: The Air Guard TM indicator light will glow anytime the Air Guard manually turned offduring the Self-cleaning cycle. is active. Air Guard will turn on and cannot be 13