Kenmore 9747 Use and Care Guide - Page 23
Kenmore 9747 - Elite 30 in. Electric Range Manual
View all Kenmore 9747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setting Oven Controls • Setting the Recipe Recall Feature To Set the Recipe Recall Feature The ,ooo, ...RECIPE RECALL pad is used to record and recall your favorite recipe settings. This feature may store and recall from 1 to 3 different settings. The Recipe Recall feature may be used with Bake or a Timed Bake, This feature will not work with any other function including a Delay Start (Delayed Timed Bake) setting. INSTRUCTIONS To Program the Oven to record a recipe setting baking (sample shown is for bake at 350°F): 1. Place the food in the oven. 2. Press ___,,_. "BAKE" flashes and "= display (See Fig. 1) 3. Within 5 seconds, press @. ( Note: @ or @ may also be and begin PRESS DISPLAY = = o ,, appears in the @ Fig. 1 ® @@@ Fig. 2 used to store a recipe setting. (See Fig. 2). ross®®® 5. Press and hold _ pad for at least 3 seconds or until a beep sounds. The beep indicates that the recipe setting has been recorded for future recall. The display will show 350 ° and "BAKE" (See Fig. 4). NOTE: The oven will continue to bake unless _ is pressed. hold _ for 3 seconds Fig. 3 ...ii ... @ Fig. 4 To Begin Baking recalled setting from the number 1 pad) : 1. Place the food in the oven. 2. 3. 4. Press ,ooo, ...(See Fig. 5). Within 5 seconds, press @ Press _. (example below recalling (See Fig. 3). @ ® The oven will begin to immediately cook with the previously recorded recipe (See Fig. 4). The Temperature is recalled and if a Timed Bake was recorded this feature will also recall the cooking time. To Set Add 1 Minute Feature The @ ADD 1 MINUTE pad is used to set additional minutes to the Minute Timer. Each time the @ pad is pressed, another minute is added to the Minute Timer if the Minute Timer is already active. If the Minute Timer is not active and the pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute. When the Minute Timer reaches the end of the set time, the timer will display "End" and signal 3 long beeps at regular intervals until @ is pressed. If a Minute Timer function has ended pressing @ will restart the timer at 1 minute. For further information on how to set the Minute Timer feature see To Set the Minute Timer instructions. 23