Kenwood 9050S Instruction Manual - Page 16

Setting up the system Connecting to the AV AUX jacks The AV AUX jacks are convenient for connection of video components such as a camcorder or a video game. AV AUX/GAME Connecting the antennas The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below. AM Loop Antenna Place the supplied loop antenna as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception. AM Antenna Terminal connections 1 Push lever. 2 Insert cord. 3 Release lever. S VIDEO VIDEO L-AUDIO-R S VIDEO cord FM Indoor Antenna The supplied indoor antenna is for temporary use only. For stable signal reception we recommend using an outdoor antenna. Disconnect the indoor antenna when you connect one outdoors. FM Antenna Terminal connections Insert Connector. FM Outdoor Antenna Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the room and connect it to the 75Ω FM terminal. VIDEO OUT Video game, Camcorder, S VIDEO OUT other VCR or portable MD Player AUDIO OUT • This model has a game function which is convenient for using game equipment. It is recommended that the game equipment be connected to AV AUX jacks and the game mode be turned ON. ) • To select the source connected to the AV AUX jacks press AV AUX/GAME key. ) • When you connect the audio source such as the MD player, you do not need to connect the video cable. • When you connect the unit and the component with the S VIDEO cord, you can get better picture quality. ANTENNA AM GND 75 FM Use an antenna adaptor (Commercially available) Attach to the stand AM Loop Antenna FM Indoor Antenna FM Outdoor Antenna 16 EN