Kenwood 9050S Instruction Manual - Page 19

Preparing for surround sound 6 Input the distance to the speakers. • Indicators appear only for the channels of the speakers selected in step 3. 1 Press the ∧/∨ keys or MULTI @/# keys to select the SP DISTANCE on setup displays and press the SETUP key again. 2 Measure the distance from the listening position to each of the speakers. Jot down the distance to each of the speakers. Distance to Front Left Speaker (L) : ____ feet (meters) Distance to Center Speaker (C) : ____ feet (meters) Distance to Front Right Speaker (R) : ____ feet (meters) Distance to Surround Right (SR) : ____ feet (meters) Distance to Surround Back Right (SBR) : ____ feet (meters) Distance to Surround Back (SB) : ____ feet (meters) Distance to Surround Back Left (SBL) : ____ feet (meters) Distance to Surround Left (SL) : ____ feet (meters) Distance to Subwoofer (SW) : ____ feet (meters) • If you have selected "SB NORMALx1" or "SB LARGEx1", "SBR" and "SBL" are not appeared but "SB" is appeared on the Display. 3 Use the ∧/∨ keys or MULTI @/# keys to select the speakers and the MULTI CONTROL knob or MULTI %/fi keys to adjust the distance to the Front Speakers. The speaker indicator to be adjusted blinks. SP MUTE L C SW R A B CLIP LFE SL S SB SR STEREO Indication in feet Indication in meters • The allowable setting range is 1 to 30 feet (0.3 to 9.0 m), adjustable in 1 foot (0.3 m) increments. 4 Repeat steps 3 to input the distance for each of the speakers. 5 Press the SETUP key again to return to main setup displays. • The speakers you have selected should appear on the display. Confirm that all the speakers have been correctly selected. 7 Adjust the LFE LEVEL (Low Frequency Effects). 1 Press the ∧/∨ keys or MULTI @/#keys to select the LFE LEVEL. 2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the LFE LEVEL. SP MUTE L R A B CLIP STEREO 8 Select the display mode. 1 Press the ∧/∨ keys or MULTI @/# keys to select the DISP MODE. 2 Use the MULTI CONTROL knob or MULTI %/fi keys to select the display mode. 1 DISP SELECTOR : Displays the current input selector. 2 DISP LISTEN : Displays the current listen mode. SP MUTE L R A B CLIP STEREO 3 Press the SETUP key again to accept the setting. 4 Use the ∧ key or MULTI # key to select EXIT. SP MUTE L R A B CLIP STEREO SL S SB SR 5 Press the SETUP key to exit the SETUP mode. • The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB decrements. 3 Press the SETUP key again to return to main setup displays. 19 EN