Kenwood 9050S Instruction Manual - Page 22

Normal playback One-touch low frequency emphasis (BASS BOOST) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo modes. Press the BASS BOOST key. • Press the key once to select the maximum (+10) low frequency emphasis setting. • This key does not function when the receiver is in the sound quality or ambience effects adjustment mode. • This function is available only for speakers connected to FRONT A terminals. Switching back to the previous setting Press the BASS BOOST key again. Recording Recording audio (analog sources) Input Selector keys Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. Blinks SP MUTE L C R A B CLIP LFE SL S SB SR To cancel Press the MUTE key again so that the "MUTE" indicator goes off. • MUTE ON can also be deactivated by turning the VOLUME CON- TROL knob or pressing VOLUME %/fi keys. ACTIVE EQ mode You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON. Press the ACTIVE EQ key for the following selections; 1 ACTIVE EQ MUSIC : Effective when listening to music. (The ACTIVE EQ indicator lights up.) 2 ACTIVE EQ CINEMA : Effective when watching movie. (The ACTIVE EQ indicator lights up.) 3 ACTIVE EQ GAME : Effective when playing video game. (The ACTIVE EQ indicator lights up.) 4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF. (The ACTIVE EQ indicator goes off.) • "ACTIVE EQ" will scroll from right to left. • ACTIVE EQ function will not be available when in REC MODE, or when searching or presetting radio stations. Input Selector keys Recording a music source 1 Use the Input Selector keys to select the source (other than "MD/ TAPE") you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording. Recording video 1 Use the Input selector keys to select the video source (other than "VIDEO 1") you want to record. 2 Set the video recorder connected to VIDEO 1 to record. • Select the REC MODE to record a digital input source. 3 Start playback, then start recording. • Recording may not be normal for some video software. This is due to the copy guard condition. › Listening with headphones 1 Connect headphones to the PHONES jack. PHONES • The sounds from all speakers are cut off. 2 Use the VOLUME CONTROL knob or VOLUME %/fi keys to adjust the volume. 22 EN