Kenwood CT-403 User Manual - Page 6

System connections 6 Caution: Do not plug in the power lead until all connections are completed. Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. ( Except for U.S.A., Canada ) Caution Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard. ÷ Do not place any objects impairing heat radiation onto the top of unit. ÷ Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below. Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm REC LL PLAY RR LINE IN LINE OUT Audio cord SYSTEM CONTROL Audio cord PHONO L R CD TUNER TAPE REC PLAY SL-16 SYSTEM CONTROL Amplifier or Receiver To AC outlet System control cord Turntable CD player SL-16 SYSTEM CONTROL 0 System control cord 7 6 4 1 ¢ ¡ Notes 1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced. 2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit. 3. Do not connect up a power source which is larger than that indicated on the socket at rear of the unit.