Kenwood D-S300 User Manual - Page 18
Repeated playback, To repeat only the programmed tracks
View all Kenwood D-S300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Repeated playback 18 Preparation ÷ Load a disc in the CD player. ÷ Set the INPUT SELECTOR to "CD" on the connected device such as AV CONTROL CENTER or receiver. GRC operation : Complete the procedure in "Basic Operations for the Graphical Remote Control Unit (GRC)" 90 D-S300 (En) MULTIPLE CD PLAYER D-S300 : Keys and control used in the operations described on this page. To repeat only the programmed tracks RC operation P.MODE GRC operation 1 Press so that the "PGM" indicator lights. Mode ENTER PGM ENTER P.mode ENTER Go to step 2 within 8 seconds. 2 Select the desired track No. +10 1 2 3 4 5 6 7 8 9 0 123 456 789 0 +10 ENTER Go to step 3 within 8 seconds. 3 Set the entry. P.MODE P.mode ENTER 4 Repeat steps 2 - 3 above. 5 Switch REPEAT ON. REPEAT Return ENTER Repeat ENTER Main unit operation The current status is displayed when the key is pressed once. When it is pressed while the status is displayed, the repeat ON status can be set to OFF (or vice versa). 6 Start playback. 6 PGM ENTER ENTER PGM01 TNO.?? ÷ All of the programmed tracks will be repeated. ÷ In case only one track is programmed, only that track will be repeated. ÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no more tracks can be programmed. REPEAT ON GRC operation To display the current status, first select the Return icon and press the ENTER key, and then select the Repeat icon and press the ENTER key. Pressing the ENTER key again while the status is displayed will set the repeat ON status to OFF (or vice versa). To cancel repeated playback Press the REPEAT key twice. (REPEAT ON → OFF) (