Kenwood D-S300 User Manual - Page 21

The CD contents are edited as follows. (1) The tape recording time input is divided by two, and tracks that can be accommodated in file A (which refers to tracks on tape side A) are selected in order of their track Nos. (2) In a few seconds, the time left on tape side A is displayed, then file B (tracks on tape side B) is edited in the same manner. Editing D-S300 (En) 21 Editing in the FILE A EDIT A 01 The selected track numbers are displayed in sequence. EDIT A -1:23 Remaining time display. Notes 1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the last track on side A or side B may be cut short. 2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music. To check the edited contents Remote control unit only RC operation GRC operation CHECK Check ENTER EDIT A 01 ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B. Playing or recording the edited contents RC operation 6 GRC operation Return ENTER ENTER To clear the edited contents RC operation P.MODE GRC operation Press any one of these keys. P.mode ENTER CLEAR Main unit operation 0 Clear ENTER Note Press the 6 key to start playback according to the edited content. The playback pauses at the beginning of the track edited for tape side B. Press the 6 key again to continue playback. When recording the edited content onto a tape, it is recommended to use the synchro recording or CCRS recording function of KENWOOD cassette decks. ÷ For details, see the instruction manual of the cassette deck. ÷ The edited data is cleared entirely.