Kenwood D-S300 User Manual - Page 20
Editing
View all Kenwood D-S300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Editing D-S300 (En) The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle 2 0 at the ends of sides A and B. Preparation ÷ Load a disc in the CD player. ÷ Check that the unit is in the normal play TRACK mode. # ÷ Set the INPUT SELECTOR to "CD" on the connected device such as AV CONTROL CENTER or receiver. GRC operation : Complete the procedure in "Basic Operations for the Graphical Remote Control Unit (GRC)" 90 MULTIPLE CD PLAYER D-S300 : Keys and control used in the operations described on this page. 1 Light the "EDIT" indicator. RC operation Do this operation in the stop mode. GRC operation EDIT MODE Mode ENTER Edit ENTER Go to step 2 within 8 seconds. If more than 8 seconds have elapsed, press the key again. 2 Enter the recording time of the tape. RC operation GRC operation When using the numeric keys: +10 1 2 3 4 5 6 7 8 9 0 123 456 789 0 +10 ENTER TIME When using the TIME key: 1 Select the time. Time ENTER EDIT MODE 2 Set the entry. E d i t ENTER Blinks. EDIT C-?? RC operation Press the numeric keys as shown below. 30-minute tape : 000) 46-minute tape : 00006 GRC operation Press the ENTER key after selecting each numeric icon. 30-minute tape : 0ENTER, 0ENTER, 0ENTER, )ENTER EDIT C-46 ÷ Recording within 99 minutes can be specified in minutes (2 digits). ÷ If you commit a mistake in time entry, press the P.MODE key and restart the procedure from the beginning. = ÷ By pressing the TIME key the set time-length intervals will change in this order: "46=54=60=74=90=??" ÷ The interval length can be adjusted with the skip keys 4 and ¢ in units of one minute (to a maximum of 99 minutes).