Kenwood DDX315 Operation Manual - Page 49

REMOTE CONTROLLER Using the steering remote controller You can assign the functions to the keys of the remote controller on the steering wheel. • This function is available only when your vehicle is equipped with the electrical steering remote controller. • You can only register/change the functions while you are parked. • If your steering remote controller is not compatible, learning may not be completed and an error message may appear. R Registering/Changing the functions 1 Display the setting screen. On the screen: 2 Display the screen. 3 Press a steering remote controller button to register/change. 4 Select a function to assign. • When changing the functions already learned, touch the button you want to change in step 3 and then touch to select the new function from the function list. • Confirm the contents of the settable functions in the function list. You cannot edit the function list. R Initializing the steering remote controller settings 1 Display the setting screen. (See the far left column.) 2 • You can change the page to display more 3 items by pressing [ ]/[ ]. 5 Repeat steps 3 and 4 as necessary. 6 Finish the procedure. • Press [ ] repeatedly to change the page on the menu screen. • The unit can register/change all of the button's functions at the same time. To do this, press each button in turn and after pressing all of them, press [Done] in the screen. However, new functions cannot be learned after this operation. • To cancel the initialization, press [No]. ENGLISH 49