Kenwood DDX315 Operation Manual - Page 52

CONNECTION/INSTALLATION Connection R Connecting wires to terminals (for DDX6015BT/DDX4015BT/DDX415BT/DDX415BTM/DDX315/DDX315M) 6 10 A fuse See page 54. See page 54.*1 Connect to the vehicle's steering remote harness. Contact your Kenwood dealer for details. USB terminal (0.8 m): See page 54. Connect to the vehicle's reverse lamp harness when Connect the antenna cord to using the optional rear view camera. the antenna terminal. See page 54. Connect to the vehicle's parking 3 brake detection switch harness. • For best safety, be sure to connect the parking sensor. Purple with white stripe (Reverse sensor wire) 1 Light green (Parking sensor wire) White ª / White with black stripe · : To front speaker (left) Gray ª / Gray with black stripe · : To front speaker (right) Green ª / Green with black stripe · : To rear speaker (left) *1 Only for DDX6015BT/DDX4015BT/DDX415BT/DDX415BTM. *2 If no connections are made, do not let the cable come out from the tab. Purple ª / Purple with black stripe · : To rear speaker (right) *2 Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier Blue (Antenna control wire) of the film-type antenna. (Max. 300 mA, 12 V) Blue with white stripe (Power control wire) When using the optional power amplifier, connect to its power control terminal. Brown (Mute control wire) Not used. Light blue with yellow stripe (Steering remote control wire) Orange with white stripe (Dimmer control wire) To use the steering wheel remote control feature, an exclusive remote adapter (not supplied) matching your car is required. To car light control switch Ignition key switch Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) To car chassis Fuse box Battery 52