Kenwood DDX315 Operation Manual - Page 53
Connecting, wires, termina, Toyota, 15WBT, 15WBTM
View all Kenwood DDX315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
CONNECTION/INSTALLATION R Connecting wires to terminals for Toyota Cars (for DDX615WBT/DDX615WBTM) Connect to the vehicle's steering remote harness. 6 • Depending on the type of vehicle, it cannot be 10 A fuse $ $ $ connected. See page 54. Connector C USB terminal (0.8 m): See page 54. Connect the antenna cord to the antenna terminal. Connect to the vehicle's reverse lamp harness when using the optional rear view camera. See page 54. 1 See page 54. Purple with white stripe (Reverse sensor wire) Light green (Parking sensor wire) Connect to the vehicle's parking 3 brake detection switch harness. • For best safety, be sure to connect the parking sensor. Blue with white stripe (Power control wire) Brown (Mute control wire) * When using the optional power amplifier, connect to its power control terminal. Not used. Connector B Connect to vehicle's harness. Connect to vehicle's harness. Connector A * If no connections are made, do not let the cable come out from the tab. Pin Color and functions of Connector A, B, and C A1 Orange/White Dimmer A2 Yellow Battery A4 Red Ignition (ACC) A5 Blue Antenna control A6 Black Ground connection A8/A7 White ª / White/Black · Left speaker (front) A10/A9 Gray ª / Gray/Black · Right speaker (front) B2/B1 Green ª / Green/Black · Left speaker (rear) B6/B5 Purple ª / Purple/Black · Right speaker (rear) C6 Gray/Red Ground C7 Light green/Red Input 1 C8 Purple/Red Input 2 ENGLISH 53