Kenwood DDX376BT Instruction Manual - Page 44

<Time Alignment&gt

Get Kenwood DDX376BT PDF manuals and user guides View all Kenwood DDX376BT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Settings 3 Adjust the crossover frequency of the selected speaker. • Adjustable items vary depending on the selected speaker type/speaker size/crossover settings. / Adjusts the output volume of the tweeter (left/ right). Adjusts the crossover frequency for the tweeter. Adjusts the output volume of the selected speaker. Adjusts the crossover frequency for the front or rear speakers (high pass filter). Adjusts the crossover frequency for the speaker (low pass filter). Adjusts the crossover slope. Selects the phase for the speaker. Make fine adjustments to the delay time of the speaker output to create a more suitable environment for your car. Select the listening position (1), select [Distance] or [Gain](2) to make an adjustment , then adjust each speaker setting (3). 1 Select from , , or . • Only for DDX396/DDX419BT: is selectable only when

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Settings
Settings
3
Adjust the crossover frequency of the
selected speaker.
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
<TW Gain (L)>/<TW Gain (R)>
Adjusts the output volume of the tweeter (left/
right).
<TW FREQ>
Adjusts the crossover frequency for the tweeter.
<Gain>
Adjusts the output volume of the selected speaker.
<HPF FREQ>
Adjusts the crossover frequency for the front or rear
speakers (high pass filter).
<LPF FREQ>
Adjusts the crossover frequency for the speaker
(low pass filter).
<Slope>
Adjusts the crossover slope.
<Phase>
Selects the phase for the speaker.
<Time Alignment>
Make fine adjustments to the delay time of the speaker
output to create a more suitable environment for your
car.
Select the listening position (
1
), select
[Distance] or [Gain](
2
) to make an
adjustment , then adjust each speaker
setting (
3
).
1
Select from
<All>
,
<Front L>
,
<Front R>
or
<Front All>
.
• Only for
DDX396
/
DDX419BT:
<Front All>
is
selectable only when
<X’over Network>
is set to
[2way]
. (Page 41)
2
Select an item to adjust.
[Distance]
Adjusts the digital time alignment
value.
[Gain]
Adjusts the output volume of the
selected speaker.
3
To determine the adjustment value, see the
following “Determining the value for <Position
DTA> adjustment”.
To initialize the setting value:
Touch
[Initialize]
.
Determining the value for <Position DTA>
adjustment
If you specify the distance from the center of the
currently set listening position to every speaker, the
delay time will be automatically computed and set.
1
Determines the center of the currently set
listening position as the reference point.
2
Measures the distances from the reference point
to the speakers.
3
Calculates the differences between the distance
of the furthest speaker and other speakers.
4
Sets the DTA value calculated in step
3
for
individual speakers.
5
Adjusts gain for individual speakers.
E.g. When
<Front All>
is selected as the listening
position
+3.5 ft
1.4 ft
2.45 ft
+2.45 ft
4.9 ft
+0 ft
42
ENGLISH