Kenwood DDX376BT Instruction Manual - Page 8
Clock settings, Registering a security code
View all Kenwood DDX376BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started Registering a security code (Only for DDX419BT) 1 Display the Home screen. 2 Display the screen. On the Home screen, touch as follows: Then, on the screen, touch as follows: [System] : [SET] 3 Enter a four-digit number (1), then confirm the entry (2). To clear the registered security code: Touch [CLR] for in step 2. Then, enter the current security code to clear and touch [Enter]. • When the unit has been reset or disconnected from the battery, you are required to enter the security code. Enter the correct security code, then touch [Enter]. 3 Set the clock time. Clock Synchronize Radio Data System AM10 : 28 Reset Clock settings 1 Display the Home screen. 2 Display the screen. On the Home screen, touch as follows: E.g. Clock settings screen for DDX396 • Radio Data System (Initial): Synchronizes the clock time with FM RBDS. • OFF: Sets the clock manually. Touch [J]/[K] to adjust the hour, then minute. - Touching [Reset] will set the minute to "00". • To delete the last entry, touch [Clear]. • To cancel the setting, touch [Cancel]. 4 Repeat step 3 to confirm your security code. Now, your security code is registered. Then, on the screen, touch as follows: [System] : [Enter] • You can also display the screen by touching the clock area on the Home screen. 6 ENGLISH