Kenwood DDX516 Instruction Manual - Page 59
Audio Control
UPC - 019048186874
View all Kenwood DDX516 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Audio Control Audio Control Menu Displays the Audio Control menu to set the sound effect function of this unit. 1 Display the Source Select Screen SRC Audio Control You can adjust the front/rear and right/left audio balance. 1 Display the Audio Control screen Touch Audio Control]. (page 59) 2 Set each item 1 2 Display the Audio Control menu In this manual, the above selection is indicated as: Touch [ ] > [ ]. 3 Select the Audio Control item Item Page [Audio Control] 59 [Equalizer] 60 [Tone] 60 [Zone Control] 61 DDX SERIES DDX616/DDX6046BT/DDX516 1 Adjusts the front/back and left/right balance of the volume by touching the Adjust screen. [2], [3] Adjusts the right and left volume balance. [5], [∞] Adjusts the front and rear volume balance. [VOL.Offset] Finely adjust the volume of the current source to minimize the difference in volume between different sources. ⁄ • If you have increased the volume first, then reduced the volume using the "VOL. Offset", the sound generated if you suddenly switch to another source may be extremely loud. [Subwoofer Level] Adjusts the subwoofer volume. The setting is available when subwoofer is set to "ON". See (page 75). [Loudness] Turns the loudness control function On or Off. If turned "ON", high and low tones are automatically enhanced during low volume. Settable only when zone function is set to Off. See (page 61). [Stream Information] Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG, MP3, WMA or AAC) is displayed. English 59