Kenwood DDX516 Instruction Manual - Page 75
Speaker Setup
UPC - 019048186874
View all Kenwood DDX516 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Speaker Setup You can select a speaker type and its size to get the best sound effects. 1 Display the Speaker Select screen Touch Audio SETUP] > [Speaker Select]. (page 62) 2 Select a speaker you wish to adjust When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. 1 2 3 Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 2 3 1 Sets the High Pass Filter of the front speaker. 2 Sets the High Pass Filter of the rear speaker. 3 Sets the Low Pass Filter of the sub woofer. 2 Display the Crossover setup screen 1 Front speaker 2 Rear speaker 3 Subwoofer [Subwoofer] Sets the availability of subwoofers. [X'over] Displays the Speaker Crossover Setup screen. You can adjust the crossover setup that was set automatically when you selected the speaker type. 3 Select a speaker type You can select front speaker type. "Standard"/ "Wide"/ "Middle"/ "Narrow" ⁄ • Speaker cannot be setup when in STANDBY source mode. 3 Set the crossover [Phase] Sets the phase of subwoofer output. The phase is reversed 180 degrees when set to "Reverse". Sets the subwoofer phase. (Only when "Subwoofer" is set to "ON" in Speaker Setup, and [LPF FREQ] is set to other than "Through") [HPF FREQ] High Pass Filter adjustment. (When front or rear speaker is selected on Speaker Select screen) [LPF FREQ] Low Pass Filter adjustment. (Only when "Subwoofer" is set to "ON" in Speaker Setup) DDX SERIES DDX616/DDX6046BT/DDX516 English 75