Kenwood DDX9019S Instruction Manual - Page 67
Adjust the date and time, manually, Touch panel adjustment, Learning function of steering, remote
View all Kenwood DDX9019S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
ÑÑAdjust the date and time manually 1 Touch [Clock] on the User Interface screen. 2 Select [Manual]. 3 Touch [Time Zone] on the User Interface screen. 4 Select the time zone. 5 Touch [Clock Adjust] on the User Interface screen. 6 Adjust the date, then adjust the time. 7 Touch [Set]. ÑÑTouch panel adjustment 1 Touch [Touch Panel Adjust] on the User Interface screen. hhTouch Panel Adjust screen appears. 2 Follow the instruction on the screen and long touch the center of each [ ]. 2 Setup ÑÑLearning function of steering remote This function is available only when your vehicle is equipped with the electrical steering remote controller. If your steering remote controller is not compliant, learning may not be completed and error message may appear. 1 Touch [Steering Remote Controller] in the User Interface screen. hhSteering Remote Controller Setting screen appears. 2 Press and hold the steering remote controller button. NOTE • You can have the unit learned all buttons at a time. In that case, press the all buttons one at a time and after pressing all of them, touch [Learning completed] in Steering Remote Controller Setting screen. However, new functions cannot be learned after this operation. 3 Touch the function you want to set. 4 Repeat steps 2 and 3 as necessary. 1 NOTE • To cancel the touch panel adjustment, touch [Cancel]. • To reset it to the default, touch [Reset]. English 67