Kenwood DDX9019S Instruction Manual - Page 92
Except Indonesia models, P. CONT, PRK SW, REVERSE
View all Kenwood DDX9019S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Connection/Installation ●●Except Indonesia models, , Fuse (15A) Connect to the vehicle's parking brake detection switch harness. PRK SW Light Green (Parking sensor wire) (2 m) For best safety, be sure to connect the parking sensor. Pink (Speed Pulse Input) (2 m) S SENS Connect to the vehicle's speed pulse harness. Do not cut the "S SENS" tag or failure may result. Purple/White (Reverse sensor wire) (2 m) REVERSE Connect to vehicle's reverse lamp harness when using the optional rear view camera. Accessory 1 If no connections are made, do not let the cable come out from the tab. Blue/White (Power control wire) P. CONT When using the optional power amplifier, connect to its power control terminal. (Max. 200mA, 12V) Green/White Green/Red CAM- CAM+ To CMOS-3xx series (Optional Accessory) camera control terminal Connect to vehicle's harness. Pin A1 A2 A4 A5 A6 A8/A7 A10/A9 B2/B1 B6/B5 Color and function Orange/White Dimmer Yellow Battery Red Ignition (ACC) Blue [1] Antenna control Black Earth (Ground) Connection White (+) / White/Black (-) Front Left Gray (+) / Gray/Black (-) Front Right Green (+) / Green/Black (-) Rear Left Purple (+) / Purple/Black (-) Rear Right * Speaker Impedance: 4-8 Ω [1] Max. 300mA, 12V 92