Kenwood DDX917WS Instruction Manual

Kenwood DDX917WS Manual

Get Kenwood DDX917WS PDF manuals and user guides View all Kenwood DDX917WS manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DDX917WS manual content summary:

  • Kenwood DDX917WS | Instruction Manual - Page 1
    WITH DVD RECEIVER DDX9017DABS DDX9017S DDX9017SM DDX917WS DDX917WSM MONITOR WITH RECEIVER DMX7017BTS INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . © 2017 JVC KENWOOD Corporation B5A
  • Kenwood DDX917WS | Instruction Manual - Page 2
    4 How to read this manual 5 Basic Operations 6 Functions of the Buttons on the Front Panel.... 6 Turning on the Unit 8 Initial Settings 9 Adjusting Digital Radio 38 Digital Radio Basic Operation 38 Storing Service in Preset Memory 39 Selecting Operation 39 Traffic Information 41 Replay
  • Kenwood DDX917WS | Instruction Manual - Page 3
    using Bluetooth® devices........43 Register from the Bluetooth unit 44 Bluetooth Setup 45 Playing Bluetooth Audio Device 47 Using Hands-Free Unit 49 /Installation 75 Before Installation 75 Installing the unit 77 Troubleshooting 85 Problems and Solutions 85 Error Messages 86 Appendix
  • Kenwood DDX917WS | Instruction Manual - Page 4
    Setup (P.58). • The Radio Data System or Radio Broadcast Data System feature won't work where the service is not supported by any broadcasting station. • The unit may not function properly if the connectors between the unit and front panel are dirty. Detach the front panel and clean the connector
  • Kenwood DDX917WS | Instruction Manual - Page 5
    writing software, and your recorder instruction manual.) ÑÑAcquiring GPS signal The first time you turn on this unit, you must wait while the system patterns may be different. • In this manual, each model name is abbreviated as follows. --DDX9017DABS/ DDX9017S/ DDX9017SM/ DDX917WS/ DDX917WSM: --
  • Kenwood DDX917WS | Instruction Manual - Page 6
    reason, they may be different from the actual panels. • In this manual, each model name is abbreviated as follows. --DDX9017DABS/ DDX9017S/ DDX9017SM: -- DMX7017BTS: If above icon is showed, read the article applicable to the unit you use. Number 1 2 3 Name Remote Sensor S, R (Volume) CAM 4 HOME
  • Kenwood DDX917WS | Instruction Manual - Page 7
    1 2 38 4 5 6 7 NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, In this manual, each model name is abbreviated as follows. --DDX917WS/ DDX917WSM: If above icon is showed, read the article applicable to the unit you use.
  • Kenwood DDX917WS | Instruction Manual - Page 8
    the unit: (DDX9017DABS/ DDX9017S/ DDX9017SM/ DMX7017BTS only) 1 Press the [HOME] button for 1 second. NOTE • If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.9). • The function of the button when held varies depending on the "Manual
  • Kenwood DDX917WS | Instruction Manual - Page 9
    Initial Settings Initial setup Perform this setup when you use this unit first time. 1 Set each item as follows. ■■ Language Select the language used for the control screen and setting items. Default is "British English (en)". 1 Touch [
  • Kenwood DDX917WS | Instruction Manual - Page 10
    Basic Operations Security Code Setup You can set up a security code to protect your receiver system against theft. When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1
  • Kenwood DDX917WS | Instruction Manual - Page 11
    -SYNC (Default): Synchronizes the clock time with the GPS. Manual: Sets the clock manually. ■■Time Zone If you have selected [Manual] for Clock, select the time zone. ■■Clock Adjust If you select [Manual] for Clock, adjust the date and time manually. (P.59) ■■Off Position You can store the current
  • Kenwood DDX917WS | Instruction Manual - Page 12
    selection screen. (P.13) 6 • Short-cut playback source icons (P.14) 7 • Displays the Hands Free screen. (P.49) • When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto. Display the HOME 1 Press the [HOME] button. hhHOME screen appears. 12
  • Kenwood DDX917WS | Instruction Manual - Page 13
    the navigation screen when a navigation unit is connected. (P.56) • Displays the Audio screen. (P.64) • Puts the unit in standby. (P.14) *1  for DDX9017DABS. *3 Only for DDX9017DABS/ DDX917WS/ DMX7017BTS Region 4. • Switches to the Digital Radio broadcast. *2 (P.38) • Plays a Bluetooth audio
  • Kenwood DDX917WS | Instruction Manual - Page 14
    Basic Operations To select the playback source on the HOME screen Put the unit in standby 1 Touch [ ] on the HOME screen. 2 Touch [STANDBY]. The 3 items displayed on the source selection screen as the large icons are shown on the
  • Kenwood DDX917WS | Instruction Manual - Page 15
    the popup menu. 2 3 4 Short-cut buttons 1 Connected Bluetooth device information. • : Lights up when quick charging battery of the Hands Free screen. (P.49) When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto. 5 6 7 The
  • Kenwood DDX917WS | Instruction Manual - Page 16
    There are some common function keys in the list screens of most sources. 1 2 6 Gesture Control (DDX917WS/ DDX917WSM) You can also operate the unit by moving your hand in front of the gesture control sensor. 1 7 12 34 5 1 Displays list type selection window. 2 Displays music/movie file
  • Kenwood DDX917WS | Instruction Manual - Page 17
    a disc 1 Press the [G] button. 2 Touch [DISC EJECT]. hhThe panel opens. 3 Insert the disc into the slot. hhThe panel closes automatically. The unit loads the disc and playback starts. ÑÑEject a disc 1 Press the [G] button. 2 Touch [DISC EJECT]. When removing a disc, pull it horizontally. 3 Press
  • Kenwood DDX917WS | Instruction Manual - Page 18
    seconds.) • [DH] : Plays or pauses. • [ ] : Touch to mute or not to mute. 5 Indicator Items • IN: A disc is inserted. White: A Disc is inside the unit. Orange: Error at the disc player VCD • 1chLL/2chLL: Identifies the left audio output of channel 1 or 2. • 1chLR/2chLR: Identifies the monaural audio
  • Kenwood DDX917WS | Instruction Manual - Page 19
    CD and audio files, see Switch the operation mode (P.72). • In this manual, "Music CD" will be referred to as the general CDs which include music 6 Indicator Items • IN: A disc is inserted. White: A Disc is inside the unit. Orange: Error at the disc player • VIDEO: Identifies the video file. • MUSIC:
  • Kenwood DDX917WS | Instruction Manual - Page 20
    Disc Video screen 9 9 10 9 Searching file area (Video file only) Touch to search the next/previous file. 10 Key display area (Video file only) Touch to display the control screen. Search Operation (Disc media only) You can search music or video files by the following operations. NOTE • If you
  • Kenwood DDX917WS | Instruction Manual - Page 21
    DVD Disc Menu Operation You can set up some items in the DVD-VIDEO disc menu. 1 Touch illustrated area during playback. hhMenu Control screen appears. 2 Perform desired operation as follows. Disc ■■Switches the picture angle Touch [Angle]. Each time you touch this key, picture angle is switched. *
  • Kenwood DDX917WS | Instruction Manual - Page 22
    Disc DVD Setup You can set up the DVD playback functions. 1 Touch illustrated area during playback. 2 Touch on the left side of the screen. Touch [SETUP]. ■■Screen Ratio Sets the screen display mode. 16:9 (Default): Displays wide pictures. 4:3 LB: Displays wide pictures in the Letter Box format (
  • Kenwood DDX917WS | Instruction Manual - Page 23
    other than [USB]. 3 Detach the USB device. ÑÑUsable USB device You can use a mass-storage-class USB device on this unit. The word "USB device" appearing in this manual indicates a flash memory device. ●●About file system The file system should be the one of the following. • FAT16 • FAT32 • exFAT
  • Kenwood DDX917WS | Instruction Manual - Page 24
    USB 3 [Function bar • 1] : Searches track/file. For details on search operation, see Search Operation (P.25). • E] [F] : Searches the previous/next track/ file. Touch and hold to fast forward or fast backward. (It will be cancelled automatically after about 50 seconds.) • [DH] : Plays or pauses. • [
  • Kenwood DDX917WS | Instruction Manual - Page 25
    Search Operation You can search music or video files by the following operations. 1 Touch [1]. 2 Touch [S]. 3 Select the list type. USB ÑÑLink search You can search a file of same artist/album/ genre as the current track. 1 Touch [Link Search]. 2 Touch the desired tag type. You can select from
  • Kenwood DDX917WS | Instruction Manual - Page 26
    www.kenwood.com/cs/ce/ipod/. • By connecting your iPod/iPhone to this unit with played first. ÑÑConnect iPod/iPhone Wired connection Preparation • Connect an iPod/ Bluetooth connection Pair the iPhone through Bluetooth. Preparation • To connect an iPhone via Bluetooth, register it as the Bluetooth
  • Kenwood DDX917WS | Instruction Manual - Page 27
    iPod/iPhone Basic Operation NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switch the operation mode (P.72). Control screen 2 4 3 5 Content list panel 1 6 7 1 Repeats the current track/album. Each time you touch the key, repeat mode switches in the following
  • Kenwood DDX917WS | Instruction Manual - Page 28
    iPod/iPhone Search Operation You can search music files by the following operations. 1 Touch [1]. 2 Touch [S]. ÑÑLink search You can search a file of same artist/album/ genre/composer as the current track. 1 Touch [Link Search]. 2 Touch the desired tag type. You can select from artist, album, genre
  • Kenwood DDX917WS | Instruction Manual - Page 29
    Android device on the monitor of the unit using the Miracast function of the Android device type. For details, refer to the instruction manual supplied with your Android device. • If your a Bluetooth device. Switch the air mirroring source to another source, and then operate the Bluetooth device.
  • Kenwood DDX917WS | Instruction Manual - Page 30
    iPhone using KCA-iP103 via USB (Black) terminal. (P.84) When iPhone compatible with CarPlay is connected to the USB (Black) terminal, the Bluetooth smartphone currently connected is disconnected. 2 Unlock your iPhone. ÑÑOperation buttons and available Apps on the home screen of CarPlay You can use
  • Kenwood DDX917WS | Instruction Manual - Page 31
    Android Auto, visit https:// www.android.com/auto/ and https://support. google.com/androidauto. Compatible Android devices You can use Android Auto the USB terminal, the device is connected via Bluetooth automatically, and the Bluetooth smartphone currently connected is disconnected. 2 Unlock your
  • Kenwood DDX917WS | Instruction Manual - Page 32
    profile setting of the connection beforehand. See Register from the Bluetooth unit (P.44) and Connect the Bluetooth unit (P.46). 4 4 Thumbs down to the current contents and spotify.com. • Because Spotify is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility
  • Kenwood DDX917WS | Instruction Manual - Page 33
    device and do the App (SPP) profile setting of the connection beforehand. See Register from the Bluetooth unit (P.44) and Connect the Bluetooth unit (P.46). 2 Function bar • [ ] : Searches for a station. For details on searching, see Station list screen (P.33). • [ ] (Thumbs down) : Thumbs
  • Kenwood DDX917WS | Instruction Manual - Page 34
    the Pandora application. • Bluetooth must be built in and the following profiles must be supported. - SPP (Serial Port services may become unavailable. • Some functions of Pandora® cannot be operated from this unit. • For issues using the application, please contact Pandora® at pandora-support
  • Kenwood DDX917WS | Instruction Manual - Page 35
    ]. • [AUTO1]: Tunes in a station with good reception automatically. • [AUTO2]: Tunes in stations in memory one after another. • [MANUAL]: Switches to the next frequency manually. 3 [FM] [AM] Switches the band. 4 Preset key Recalls the memorized station. When touched for 2 seconds, stores the current
  • Kenwood DDX917WS | Instruction Manual - Page 36
    by program type (FM only) You can tune to a station with a specific program type when listening to FM. 1 Touch [PTY]. hhAuto memory starts. ÑÑManual memory You can store the current receiving station in memory. 1 Touch desired band key. 2 Select a station you wish to store in memory. 3 Touch
  • Kenwood DDX917WS | Instruction Manual - Page 37
    . • The volume setting during reception of traffic information is automatically stored. The next time the traffic information is received, this unit recalls the volume setting automatically. hhRadio SETUP screen appears. 2 Set each item as follows. ■■ NEWS Sets a news bulletin interrupt time
  • Kenwood DDX917WS | Instruction Manual - Page 38
    Digital Radio Digital Radio (DDX9017DABS) Digital Radio Basic Operation Most functions can MANUAL]: Switches to the next ensemble manually. 4 Function bar • [1] : Displays the Service List screen. For details on search operation, see Service search (P.40). • [E] [F] : Tunes in a ensemble, service
  • Kenwood DDX917WS | Instruction Manual - Page 39
    ÑÑFunction panel 1 Touch on the left side of the screen. Digital Radio Storing Service in Preset Memory You can store the current receiving service in memory. 1 Select a service you wish to store in memory. 2 Touch on the right side of the screen. The functions of each key are as follows. [TI]
  • Kenwood DDX917WS | Instruction Manual - Page 40
    program type when listening to Digital Radio. 1 Touch on the left side of the screen. Touch [PTY]. ÑÑService search You can select a service from a list of all services received. 1 Touch [1]. 2 Select the desired content from the list. hhPTY Search screen appears. 2 Select a program type from
  • Kenwood DDX917WS | Instruction Manual - Page 41
    information is automatically stored. The next time the traffic information is received, this unit recalls the volume setting automatically. ■■[E] [F] Forward/backward 15 seconds when touch it current station, you can not store the station by Storing Service in Preset Memory (P.39). English 41
  • Kenwood DDX917WS | Instruction Manual - Page 42
    also receives L-band ensembles. When the setting is changed, the preset services are initialized. ■■[Related Service] When you select ON, the unit switches to a related service (if exists) when a Digital Radio service network is not available. Default is "OFF". ■■Language Select Selects a display
  • Kenwood DDX917WS | Instruction Manual - Page 43
    -phones verified for compatibility, access the following URL: http://www.kenwood.com/cs/ce/bt/. • The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG. • However, it may be impossible for such
  • Kenwood DDX917WS | Instruction Manual - Page 44
    , and the other apps in your smartphone over SPP. This message appears if the device supports BT audio (A2DP) or smartphone link (SPP). ●●SSP (Secure Simple Pairing of Bluetooth 2.1 or later) 1 Search the unit ("DDX****"/ "DMX****") from your smartphone/cell-phone. 2 Confirm the request both on the
  • Kenwood DDX917WS | Instruction Manual - Page 45
    message appears if the device supports PBAP. Bluetooth Control Bluetooth Setup 1 Press the [ Bluetooth connection icon appears on the screen. hhSETUP Menu screen appears. 3 Touch [Bluetooth]. hhBluetooth SETUP screen appears. See the following section for each setting. • Connect the Bluetooth unit
  • Kenwood DDX917WS | Instruction Manual - Page 46
    to check. hhProfile select screen appears. NOTE • If the icon is lighted, it means that the unit will use that device. 3 Set each profile as follows. ■■[þ All] Select all Bluetooth unit. ■■[¨ All] Erases all check marks. 3 Touch [Delete]. hhConfirmation message appears. 4 Touch [Yes]. ■■ TEL (HFP
  • Kenwood DDX917WS | Instruction Manual - Page 47
    Device Most function can be controlled from the source control screen. To enter Bluetooth source, touch [Bluetooth] icon in the source selection screen. (P.13) ÑÑBluetooth basic operation Control screen 1 5 4 2 3 1 Device name/ [ ] / [ ] • Connected device name. • [ ] : Repeats the current track
  • Kenwood DDX917WS | Instruction Manual - Page 48
    See Connect the Bluetooth audio (P.48). 5 Play mode indicator/ Playing time D, H: Current play mode indicator The meanings of each icon are as follows; D (play), B (fast forward), A (fast backward), H (pause), I (stop). * These items appear only when the audio player which supports AVRCP profile is
  • Kenwood DDX917WS | Instruction Manual - Page 49
    Bluetooth telephone to this unit. NOTE • While Apple CarPlay or Android Auto is being connected, Bluetooth Hands-Free function and two Bluetooth from the list. hhHands Free screen appears. NOTE • If your mobile phone supports PBAP, you can display the phone book and call lists on the touch panel
  • Kenwood DDX917WS | Instruction Manual - Page 50
    Bluetooth Control Call using the preset number 1 Touch [ ]. 2 Touch the Name or phone (P.53). ÑÑVoice Recognition You can access the voice recognition function of the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The functionality depends on the cell-phone.)
  • Kenwood DDX917WS | Instruction Manual - Page 51
    ÑÑReceive a call 1 Touch [ ] to answer a phone call or [ ] to reject an incoming call. Bluetooth Control ●●Adjust the receiver volume Press the [S] or [R] button. NOTE • While monitoring the view camera, this screen does not appear even if a call comes in.
  • Kenwood DDX917WS | Instruction Manual - Page 52
    Control ÑÑPhone number preset You can register frequently used phone numbers to this unit. 1 Touch [ ]. 2 Touch [Edit]. ÑÑPhonebook transfer You can transfer the phonebook in your Bluetooth smartphone via PBAP. 1 Touch [ ]. 2 Touch [ ]. 3 Select where to preset. hhThe phonebook data transmission
  • Kenwood DDX917WS | Instruction Manual - Page 53
    ringing tone) and Bluetooth audio player. Front: Outputs from the front speakers. All (Default): Outputs from all speakers. Bluetooth Control ■■Auto Response on to automatically register the iPod touch or iPhone connected to this unit. ON (Default): Uses Apple Auto Pairing function. OFF: Not uses
  • Kenwood DDX917WS | Instruction Manual - Page 54
    CAM Settings ( ) If you select [CMOS 3-Series Camera] for [Rear Camera], adjusts the CMOS-3xx series with ID 1 set. For details, see the instruction manual of your camera. ■■Parking Guidelines You can display parking guidelines to enable easier parking when you shift the gear to the reverse
  • Kenwood DDX917WS | Instruction Manual - Page 55
    you select [CMOS 3-Series Camera] for [Dashboard Camera /Front Camera], adjusts the CMOS-3xx series with ID 2 set. For details, see the instruction manual of your camera. ■■Front Camera Mirror Image ( ) If you select [ON] for [Dashboard Camera / Front Camera]. ON: Displays the picture from
  • Kenwood DDX917WS | Instruction Manual - Page 56
    External Components Use Dashboard Camera A Dashboard Camera, DRV-N520 (optional accessory), connected to this unit lets you play video-recorded data and so on. For details, see the instruction manual of the Dashboard Camera DRV-N520 (optional accessory). NOTE • To connect a dashboard camera, see
  • Kenwood DDX917WS | Instruction Manual - Page 57
    can connect the TV tuner (commercially available) with this unit and watch TV. Preparation • When you use TV control can be controlled with its supplied remote control through the remote sensor on the front panel of this unit. 1 Select [AV-IN] as the source. (P.13) 2 Touch Key display area. Setting
  • Kenwood DDX917WS | Instruction Manual - Page 58
    up AV (P.63) • Set up display (P.61) • Set up the user interface (P.58) • Set up camera (P.54) • Set up special (P.60) • Set up Bluetooth (P.45) • Set up security (P.10) • Set up navigation (P.56) hhUser Interface screen appears. 4 Set each item as follows. ■■Steering Remote Controller Sets the
  • Kenwood DDX917WS | Instruction Manual - Page 59
    center of each [ ]. 2 1 NOTE • To cancel the touch panel adjustment, touch [Cancel]. • To reset to the initial status, touch [Reset]. ÑÑRegister operations by Gesture Control (DDX917WS/ DDX917WSM) You can register operations that work by the motion of your hand. 1 Touch [Gesture SETUP] on the User
  • Kenwood DDX917WS | Instruction Manual - Page 60
    and hold the steering remote controller button NOTE • You can have the unit learned all buttons at a time. In that case, press the all buttons Default is "OFF" (Region 2/3)/ "ON" (Region 4). ■■Manual Power OFF (DDX9017DABS/ DDX9017S/ DDX9017SM/ DMX7017BTS only) Assigns the function of the [HOME
  • Kenwood DDX917WS | Instruction Manual - Page 61
    . ■■Software Information Check the software version of this unit. (P.61) ■■Open Source Licenses Displays the open unit. 1 Touch [Software Information] in the Special screen. 2 Confirm the software version. Setting Up NOTE • For how to update the software, see the relevant update procedure manual
  • Kenwood DDX917WS | Instruction Manual - Page 62
    Setting Up ÑÑCustomizing the key color You can set the button illumination color. 1 Touch [Key Color] in the Display screen. 2 Touch the desired color. ÑÑChange background image or color 1 Touch [Background] in the Display screen. 2 Select an image. *1 *2 ■■ User The color you have set in the
  • Kenwood DDX917WS | Instruction Manual - Page 63
    , you can perform some simple operations by touching the screen of this unit. OFF (Default): Set to OFF when not connecting the 3rd party You cannot select iPod if it is connected via Bluetooth. If you select USB, iPod, Disc, Spotify, Pandora, Bluetooth audio, Apple CarPlay or Android Auto as the
  • Kenwood DDX917WS | Instruction Manual - Page 64
    Controlling Audio Controlling Audio NOTICE • Each operation in this section can be started from the multi function menu. You can adjust the various settings such as audio balance or subwoofer level. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. Speaker/ X'over setup 1 Press the
  • Kenwood DDX917WS | Instruction Manual - Page 65
    ■■Tweeter (Only for Front) You can set the tweeter when you are selecting front speakers. None, Small, Medium, Large ■■ X'over Displays the speaker crossover setup screen. You can adjust the crossover setup that was set automatically when you selected the speaker type. For details, see Crossover
  • Kenwood DDX917WS | Instruction Manual - Page 66
    Controlling Audio ■■FREQ (High Pass) High Pass Filter adjustment. (When tweeter is selected on Speaker Select screen) ■■HPF FREQ, LPF FREQ (Band Pass) Band Pass Filter adjustment. (When mid range speaker is selected on Speaker Select screen) ■■FREQ (Low Pass) Low Pass Filter adjustment. (When woofer
  • Kenwood DDX917WS | Instruction Manual - Page 67
    ■■Fader / Balance Adjust the volume balance around the touched area. [C] and [D] adjust the right and left volume balance. [R] and [S] adjust the front and rear volume balance. ■■ [Center] Clear the adjustment. Equalizer Control You can adjust equalizer by selecting the optimized setting for each
  • Kenwood DDX917WS | Instruction Manual - Page 68
    Controlling Audio Volume Offset Finely adjust the volume of the current source to minimize the difference in volume between different sources. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Volume Offset]. Zone Control You can select different
  • Kenwood DDX917WS | Instruction Manual - Page 69
    (P.67, 69, 69) --Speaker Setup (P.64) --High-resolution Sound Source File Playback • You cannot select iPod if it is connected via Bluetooth. • If you select USB, iPod, Disc, Bluetooth audio, Apple CarPlay or Android Auto as the Front Source, you cannot select USB or iPod as the Rear Source. Sound
  • Kenwood DDX917WS | Instruction Manual - Page 70
    Controlling Audio ÑÑListening Position Adjust the sound delay time as nearer speakers to the selected seat have more delay time, so that the sound from each speaker arrive a listener at the same time. 1 Touch [Listening Position] in the Position/ DTA screen. 2 Select listening position from [Front
  • Kenwood DDX917WS | Instruction Manual - Page 71
    Adjust the delay time of subwoofer. 4 Touch [Level]. 5 Touch [T] or [U] to adjust the sound level of the selected speaker. Remote control Remote control This unit can be operated using the remote control. # CAUTION • Put the remote control in a place where it will not move during braking or other
  • Kenwood DDX917WS | Instruction Manual - Page 72
    this mode when playing a disc media including DVD, VCD, and CD. ■■TV mode Not used. NOTE • When controlling a player that is not integrated in the unit, select "AUD" mode. ÑÑDirect search mode Using the remote control, you can jump directly to the desired file, track chapter, etc. with entering the
  • Kenwood DDX917WS | Instruction Manual - Page 73
    band to be received. Selects the track or file to be played. During radio source in AUD mode, switches to broadcast stations received by the unit. English 73
  • Kenwood DDX917WS | Instruction Manual - Page 74
    Remote control Key Name 11 Numeric Keypad 12 CLEAR 13 DIRECT 14 AUDIO 15 RETURN 16 SUBTITLE 17 18 ANGLE 19 VOL RS 20 ZOOM 21 2 ZONE 22 R.VOL 23 ATT Mode switch AUD DVD DVD AUD, DVD DVD DVD NAV DVD − DVD − DVD AUD, DVD − − Function Specifies the number to search in direct search. For details on
  • Kenwood DDX917WS | Instruction Manual - Page 75
    a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. • Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the ¤ wires or ground them to any metal part in the car. • When only
  • Kenwood DDX917WS | Instruction Manual - Page 76
    / DMX7017BTS only [4] DDX9017DABS only ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Make the proper input and output wire connections for each unit. 3) Connect the speaker wires of the wiring harness. 76
  • Kenwood DDX917WS | Instruction Manual - Page 77
    5) Connect the wiring harness connector to the unit. 6) Install the unit in your car. 7) Reconnect the ¤ terminal of the battery. 8) Perform the Initial Setup. See Initial setup (P.9). Installing the unit ÑÑJapanese cars 6 or 7 Car Bracket 6 or 7 ÑÑTrim plate (DDX9017DABS/ DMX7017BTS) 1) Attach
  • Kenwood DDX917WS | Instruction Manual - Page 78
    DDX9017DABS/ DMX7017BTS) 1) Detach accessory 5 to the unit. ●●Installation overview The antenna should be installed on the passenger side for safety. ! @ 5 ÑÑInstallation the Digital Radio antenna (DDX9017DABS --Where it overlaps with window heating wires --When glass that blocks radio signals
  • Kenwood DDX917WS | Instruction Manual - Page 79
    vehicle dealer for details on replacing the front pillar cover and availability of replacement parts. Front pillar cover Clip • Install the amplifier unit (accessory @) above the air bag so that the antenna and the air bag. @ Air bag Front pillar Connection/Installation ●●Determining the antenna
  • Kenwood DDX917WS | Instruction Manual - Page 80
    interior parts (front pillar cover). Also take care that the interior parts do not obstruct the amplifier unit (accessory @). Front glass @ Front pillar Font pillar cover Earth sheet 8) Wire the antenna cables. Use cord clamper (accessory =) to secure the antenna cable to the pillar in several
  • Kenwood DDX917WS | Instruction Manual - Page 81
    Connection/Installation ÑÑConnecting wires to terminals ●●DDX9017DABS/ DDX9017S/ DDX9017SM/ DMX7017BTS Fuse (15A) White White/Black Speaker impedance: 4-8 Ω To front left speaker Gray Gray/Black To front right speaker Connect to the vehicle's
  • Kenwood DDX917WS | Instruction Manual - Page 82
    the optional rear view camera. Accessory 1 If no connections are made, do not let the cable come out from the tab. Blue/White (Power control wire) P. CONT When using the optional power amplifier, connect to its power control terminal. (Max. 200mA, 12V) Green/White Green/Red CAM- CAM+ To CMOS
  • Kenwood DDX917WS | Instruction Manual - Page 83
    14 13 12 11 10 9 876 5 1 2 3 4 1 DAB antenna (DDX9017DABS only) 2 AV Audio output (ø3.5 mini jack) 3 FM/AM antenna input 4 When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. Rear Audio Preout (Left; White, Right; Red) Front Audio
  • Kenwood DDX917WS | Instruction Manual - Page 84
    accessory). (P.85) 9 Accessory 5: GPS Antenna 10 Accessory 3: Bluetooth Microphone 11 Accessory -: Steering remote harness Connect to vehicle's steering remote harness. Contact your KENWOOD dealer for details. DDX9017DABS/ DDX9017S/ DDX9017SM/ DMX7017BTS : DDX917WS/ DDX917WSM : C21 C22 C23
  • Kenwood DDX917WS | Instruction Manual - Page 85
    Troubleshooting Troubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. NOTE • Some functions of this unit antenna all the way. The antenna control wire is not connected. †† Connect the wire correctly. See Connecting the system and external
  • Kenwood DDX917WS | Instruction Manual - Page 86
    unit. †† Use the unit again after reducing the temperature of the unit. Mecha Error The disc player is malfunctioning. †† Eject the disc and try inserting it again. Contact the KENWOOD , Bluetooth audio player) The iPod/Bluetooth audio player is selected as a source although no iPod/Bluetooth audio
  • Kenwood DDX917WS | Instruction Manual - Page 87
    . × : Playback is impossible. Support Remark v × × v • MP3 supported. × v × × r Only music CD session can be played. r Normal music CD sound quality × × r Only CD layer can be played. *1 Incompatible with 8 cm (3 inch) discs. ■■Use of DualDisc When playing a "DualDisc" on this unit
  • Kenwood DDX917WS | Instruction Manual - Page 88
    of which is covered with DRM cannot be played. • DSD sound is converted to PCM sound before playback. • The EmChinks tag of DSDIFF is not supported. • Although the audio files are complied with the standards listed above, the play may be impossible depending on the types or conditions of media or
  • Kenwood DDX917WS | Instruction Manual - Page 89
    1 5 4 ■■Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the the disc manual. Prohibition Mark ■■Discs with limited period of use Do not leave discs with a limited period of use in this unit. If you
  • Kenwood DDX917WS | Instruction Manual - Page 90
    Appendix DVD Language Codes Code Language aa Afar ab Abkhazian af Afrikaans am Amharic ar Arabic as Assamese ay Aymara az Azerbaijani ba Bashkir be Byelorussian bg Bulgarian bh Bihari bi Bislama bn Bengali, Bangla bo Tibetan br Breton ca Catalan co Corsican cs Czech
  • Kenwood DDX917WS | Instruction Manual - Page 91
    Auto (149,153,157,161ch) DDX9017SM/ DDX917WSM: Auto (1-11ch) Transfer rates (MAX) • 11a: 54 Mbps (DDX9017DABS/ DDX9017S/ DDX917WS) • 11b: 11 Mbps • 11g: 54 Mbps • 11n: 150 Mbps Output Power • 11a: 14 dBm ± 2 dB (DDX9017DABS/ DDX9017S/ DDX917WS) • 11b: 17 dBm ± 2 dB • 11g: 15 dBm ± 2 dB • 11n: 14 dBm
  • Kenwood DDX917WS | Instruction Manual - Page 92
    Bluetooth section Technology : Bluetooth Ver.3.0 Frequency : 2.402 - 2.480 GHz Output Power : +4dBm (MAX), 0dBm (AVE), Power Class2 Maximum Communication range : Line of sight approx. 10m (32.8 ft) Audio Codec : SBC/ AAC Profile (Multi Profile support Connector section (DDX9017DABS) Connector type
  • Kenwood DDX917WS | Instruction Manual - Page 93
    - 1701 kHz (9 kHz) DDX9017S/ DDX917WS Region 3 : 531 - 1611 kHz (9 kHz) DDX9017SM/ DDX917WSM Region 2 : 531 - 1602 kHz (9 kHz) Usable Sensitivity DDX9017DABS/ DDX917WS/ DMX7017BTS Region 4 : 28 dBμ DDX9017S/ DDX917WS Region 3: 25μV DDX9017SM/ DDX917WSM Region 2: 25μV ■■Video section Color System of
  • Kenwood DDX917WS | Instruction Manual - Page 94
    Appendix About this Unit ■■Copyrights • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • Manufactured under
  • Kenwood DDX917WS | Instruction Manual - Page 95
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  • Kenwood DDX917WS | Instruction Manual - Page 96
    classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Hereby, JVC KENWOOD declares that the radio equipment DDX9017SM/ DDX917WSM is in compliance with Directive
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
B5A-1732-00 b
(M/M2/X)
© 2017 JVC KENWOOD Corporation
MONITOR WITH DVD RECEIVER
DDX9017DABS
DDX9017S
DDX9017SM
DDX917WS
DDX917WSM
MONITOR WITH RECEIVER
DMX7017BTS
INSTRUCTION MANUAL
•
Updated information (the latest Instruction Manual, system updates, new
functions, etc.) is available from