Kenwood DDX917WS Instruction Manual - Page 67
Equalizer Control, Recall the EQ curve
![]() |
View all Kenwood DDX917WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
■■Fader / Balance Adjust the volume balance around the touched area. [C] and [D] adjust the right and left volume balance. [R] and [S] adjust the front and rear volume balance. ■■ [Center] Clear the adjustment. Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Equalizer]. Controlling Audio ■■ Initialize The current EQ curve returns to flat. ■■ALL SRC Apply the adjusted equalizer to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen. ■■Bass EXT (Bass Extend Settings) When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5 Hz. ■■SW Level Adjusts the subwoofer volume. This setting is not available when subwoofer is set to "None". See Speaker/ X'over setup (P.64). ÑÑRecall the EQ curve 1 Touch [Preset Select]. 2 Select EQ curve. 4 Touch the screen and set the Graphic Equalizer as desired. ■■Gain level (dotted frame area) Adjust the gain level by touching the each frequency bar. You can select frequency bar and adjust its level by [R], [S]. ■■Preset Select Displays the screen to recall the preset equalizer curve. ■■ Memory Saves the adjusted equalizer curve from "User1" to "User4". NOTE • [iPod] is available only during iPod source. ÑÑSave the EQ curve 1 Adjust the EQ curve. 2 Touch [Memory]. 3 Select where to save. English 67
![](/manual_guide/products/kenwood-ddx9017dabs-instruction-manual-6065367/67.png)