Kenwood DDX917WS Instruction Manual - Page 58
System Setup, User Interface Setup, Press the, button., Touch, Set each item as follows.
View all Kenwood DDX917WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Setting Up System Setup NOTE • Each operation in this section can be started from the multi function menu. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. User Interface Setup You can setup user interface parameters. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP screen appears. 3 Touch [User Interface]. See the following section for each setting. • Set up AV (P.63) • Set up display (P.61) • Set up the user interface (P.58) • Set up camera (P.54) • Set up special (P.60) • Set up Bluetooth (P.45) • Set up security (P.10) • Set up navigation (P.56) hhUser Interface screen appears. 4 Set each item as follows. ■■Steering Remote Controller Sets the desired function in the steering remote controller. See Learning function of steering remote (P.60). ■■ Beep Volume Sets the sound volume of the key touch tone. "0" (Off ) - "3" (Default) - "5" ■■[Gesture Control]*1 Select to be on or off the Gesture Control. (P.16) Default is "ON". ■■[Gesture Beep]*1 The beep comes out when a gesture is detected. Default is "ON". ■■[Gesture SETUP]*1 Assign the functions or sources/screens to display for gesture control. (Page 61) ■■[Gesture Sensitivity]*1 If you have selected [OFF] for [Gesture Control], adjust the detection range of the Gesture Control from "1" (short) to "12" (long). Default is "7". ■■Language Select Selects a language. ■■Touch Panel Adjust ( ) Adjust the sensing position of touch panel. (P.59) 58