Kenwood DDX917WS Instruction Manual - Page 79
CAUTION, When installing the antenna cable, inside a front pillar that contains an air
![]() |
View all Kenwood DDX917WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
NOTE • *Where the earth sheet of Amplifier (accessory@) can be pasted on the metal part of the front pillar. #CAUTION When installing the antenna cable inside a front pillar that contains an air bag • The front pillar cover is secured with a special clip which may need to be replaced when the front pillar cover is removed. Contact your vehicle dealer for details on replacing the front pillar cover and availability of replacement parts. Front pillar cover Clip • Install the amplifier unit (accessory @) above the air bag so that the antenna and the air bag. @ Air bag Front pillar Connection/Installation ●●Determining the antenna installation location 1) Remove the front pillar cover of your car. Front pillar cover 2) Clean the windscreen with the supplied cleaner (accessory ~). ~ • Wait until the glass surface is completely dry before pasting. • If the glass surface is cold, such as during winter, warm it with defroster or dryer. 3) Remove the first sheet (tag 1) of film antenna (accessory !) horizontally and paste the antenna on the front glass. Sheet (tag 1) ! • Do not touch the pasting surface (adhesive side) of the film antenna (accessory !). 4) Rub the film antenna (accessory !) gently in the direction of the arrow shown below to firmly stick it to the windscreen. English 79
![](/manual_guide/products/kenwood-ddx9017dabs-instruction-manual-6065367/79.png)