Kenwood DDX917WS Instruction Manual - Page 82
Ddx917ws/ Ddx917wsm, P. Cont, Prk Sw, Reverse
![]() |
View all Kenwood DDX917WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Connection/Installation ●●DDX917WS/ DDX917WSM Fuse (15A) Connect to the vehicle's parking brake detection switch harness. Light Green PRK SW (Parking sensor wire) (2 m) For best safety, be sure to connect the parking sensor. Purple/White (Reverse sensor wire) (2 m) REVERSE Connect to vehicle's reverse lamp harness when using the optional rear view camera. Accessory 1 If no connections are made, do not let the cable come out from the tab. Blue/White (Power control wire) P. CONT When using the optional power amplifier, connect to its power control terminal. (Max. 200mA, 12V) Green/White Green/Red CAM- CAM+ To CMOS-3xx series (Optional Accessory) camera control terminal Connect to vehicle's harness. Pin Color and function A1 Orange/White Dimmer A2 Yellow Battery A4 Red Ignition (ACC) A5 Blue [1] Antenna control A6 Black Earth (Ground) Connection A8/ A7 White (+) / White/Black (-) Front Left A10/ A9 Gray (+) / Gray/Black (-) Front Right B2/ B1 Green (+) / Green/Black (-) Rear Left B6/ B5 Purple (+) / Purple/Black (-) Rear Right *Speaker Impedance: 4-8 Ω [1] Max. 300mA, 12V 82
![](/manual_guide/products/kenwood-ddx9017dabs-instruction-manual-6065367/82.png)