Kenwood DMX5020BTS Instruction Manual - Page 45
Connecting an iPhone/Android, ISO Connector function guide, Color and function
View all Kenwood DMX5020BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
ÑÑISO Connector function guide Pin A-4 A-5 A-6 A-7 A-8 B-1/ B-2 Color and function Yellow Battery Blue Orange/White Power Antenna[1] Illumination Red Ignition (ACC) Black Purple (+) / Purple/Black (-) Earth (Ground) Connection Rear Right B-3/ B-4 Gray (+) / Gray/Black (-) Front Right B-5/ B-6 White (+) / White/Black (-) B-7/ B-8 Green (+) / Green/Black (-) [1] Max. 150 mA, 12V • Speaker Impedance: 4-8 Ω Front Left Rear Left !!CAUTION Before you connect the commercially available ISO connectors to the unit, check the following condition: • Make sure that the pin assignment of the connector matches with the KENWOOD unit. • Take extra notice of the power wire. • In case battery wire and ignition wire are not corresponding then change them accordingly. • In case the car does not have an ignition wire, use a commercially available interface. Connection/Installation ÑÑConnecting an iPhone/Android Android smartphone[2] USB cable[2] KCA-iP103 (0.8m)[3] iPhone[2] Lightning connector USB terminal[1] (1.0 m) 5V=1.5A Cap [1] USB maximum power supply current : DC 5 V = 1.5 A [2] Sold separately [3] Optional accessory English 45