Kenwood DMX7017DABS Instruction Manual - Page 63
Controlling Audio, Speaker/ X’over setup
![]() |
View all Kenwood DMX7017DABS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Controlling Audio NOTICE • Each operation in this section can be started from the multi function menu. You can adjust the various settings such as audio balance or subwoofer level. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. Controlling Audio Speaker/ X'over setup 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Speaker/X`over]. 4 Select a car type. You can setup the car type and speaker network, etc. If your car type is selected, the Delay Time Alignment is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. See the following section for each setting. • Set up speaker/ X'over (P.63) • Controlling equalizer (P.66) • Set listening position/ DTA (P.69) • Controlling general audio (Fader / Balance) (P.65) • Set volume offset (P.67) • Performing zone control (P.67) • Set sound effect (P.68) 5 Touch the speaker (1) you wish to adjust and set each item (2) as follows. 1 2 ■■ Speaker You can select a speaker type and its size to get the best sound effects. When the speaker type and size are set, the speaker crossover network is set automatically. ■■Location (Only for Front, Rear) Select the speaker position you have fixed. English 63
![](/manual_guide/products/kenwood-ddx9717bts-instruction-manual-69b2316/63.png)