Kenwood DMX7017DABS Instruction Manual - Page 65
Controlling General Audio, way speaker system setup
View all Kenwood DMX7017DABS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
■■FREQ (High Pass) High Pass Filter adjustment. (When tweeter is selected on Speaker Select screen) ■■HPF FREQ, LPF FREQ (Band Pass) Band Pass Filter adjustment. (When mid range speaker is selected on Speaker Select screen) ■■FREQ (Low Pass) Low Pass Filter adjustment. (When woofer is selected on Speaker Select screen) ■■ Slope*3 Sets a crossover slope. ■■ Gain Sets gain of each speaker. ■■Phase Inversion*2 Sets the phase of tweeter, mid range, and woofer output. Check [Phase Inversion] to shift the phase 180 degrees. NOTE • For how to switch to the 3-way speaker system, see 3 way speaker system setup (P.65). Connecting 3-way speakers with the 2-way mode selected can break the speakers. ÑÑ3 way speaker system setup Select the appropriate crossover network mode according to the speaker system (2-way speaker system or 3-way speaker system). 1 Press the [HOME] button. hhHOME screen appears. 2 Touch [ ]. hhSource selection screen appears. 3 Touch [STANDBY]. 4 Press the [G] / [AV] button and the [S] button for 1 second at the same time. Controlling Audio 5 Select the crossover network mode. hhA confirmation screen appears. 6 Touch [Yes]. NOTE • When the 3-way speaker system is selected, the following functions are disabled. --Zone Control --Fader of Controlling General Audio --Front focus of Listening Position/ DTA --Select the speakers to output the sound from cell-phone of Blutooth HF/Audio --Beep of User Interface Setup • Connecting 3-way speakers with the 2-way mode selected can break the speakers. Controlling General Audio 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Fader / Balance]. 4 Set each item as follows. hhSpeaker system select screen appears. English 65