Kenwood DMX7017DABS Instruction Manual - Page 64
Crossover network setup, When Speaker network is set to 3 way
View all Kenwood DMX7017DABS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Controlling Audio ■■Tweeter (Only for Front) You can set the tweeter when you are selecting front speakers. None, Small, Medium, Large ■■ X'over Displays the speaker crossover setup screen. You can adjust the crossover setup that was set automatically when you selected the speaker type. For details, see Crossover network setup (P.64) When Speaker network is set to 3 way: 1 2 NOTE • For how to switch to the 3-way speaker system, see 3 way speaker system setup (P.65). Connecting 3-way speakers with the 2-way mode selected can break the speakers. • Select "None" if you have no speakers. ÑÑCrossover network setup You can set a crossover frequency of speakers. 1 Touch [X`over]. 2 Touch the speaker to set. ■■HPF FREQ High Pass Filter adjustment. (When front or rear speaker is selected on Speaker Select screen) ■■LPF FREQ Low Pass Filter adjustment. (When subwoofer is selected on Speaker Select screen) ■■ Slope*1 Sets a crossover slope. ■■ Gain Adjusts the front speaker, rear speaker, or subwoofer level. ■■TW (Tweeter) Gain *2 Adjusts the tweeter level. (When front is selected on Speaker Select screen) ■■Phase Inversion*3 Sets the phase of subwoofer output. Check [Phase Inversion] to shift the phase 180 degrees. (When subwoofer is selected on Speaker Select screen) *1 Only when "LPF FREQ"/"HPF FREQ" is set to a mode other than "Through" in [X`over]. *2 Only when "Tweeter" is set to "Small", "Medium", "Large" in [Speaker Setup]. *3 Only when "Subwoofer" is set to a mode other than "None" in [Speaker Setup]. When Speaker network is set to 3 way: 3 Set each item as follows. 64