Kenwood DNX8120 Instruction Manual - Page 58
Setting Up the Hands Free Phone
UPC - 019048177223
View all Kenwood DNX8120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Hands Free Unit Control If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number. Make a call. ⁄ • If there are more than one phone numbers registered under the same name, and the key word voice is registered for each phone number, you will hear another beep. For how to register key word, see (page 60). If there are more than one phone numbers registered under the same name, go to step 3. 3 Select a Phone number category 4 6 7 5 Setting Up the Hands Free Phone The Hands Free system can be set as follows. 1 Display the Hands Free Setup screen 2 Setup each item 1 2 3 4 5 6 8 4 Calls the displayed phone number. 5 Creates an SMS to the displayed address. See (page 62). 6 Selects the Phone number category. 7 Scrolls the phone number. 8 Returns to the Hands Free Control screen. 4 Make a call ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation. 58 DNX8120/DDX812/DDX8032BT 7 8 9 10 11 12 1 Moves to the "Hands Free Setup 2" screen. 2 Sets an automatic response time after call termination. ( "8") "Off": This function can not use. "0-99": Sets to calling ring time (second). 3 Sets a ringing tone output position. ( "Front R") "Front L": Outputs the tone from the front left-hand side speaker. "Front R": Outputs the tone from the front right-hand side speaker. "Front All": Outputs the tone from the both front speakers. 4 Sets the beep of the incoming call. ( "On") "On": Beep is heard. "Off": Beep is canceled.