Kenwood DNX8120 Instruction Manual - Page 68
Crossover Network Setup
UPC - 019048177223
View all Kenwood DNX8120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Setup Menu Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 2 2 3 3 5 4 6 1 Sets the High Pass Filter of the center speaker. 2 Sets the High Pass Filter of the front speaker. 3 Sets the High Pass Filter of the rear speaker. 4 Sets the Low Pass Filter of the sub woofer. 5 Switches to the crossover setup screen. 6 Returns to the "SETUP Menu" screen. 2 Display the Crossover setup screen on the Speaker Set Up screen. 3 Set the crossover 7 8 9 10 7 Sets the crossover frequency. When center speaker, front speaker or rear speaker is selected in step 1: High Pass Filter adjustment When Subwoofer is selected in step 1 : Low Pass Filter adjustment 8 Sets a crossover slope. 9 Sets the phase of subwoofer output (it is displayed when the subwoofer crossover frequency is set). The phase is reversed 180 degrees when set to "Reverse". p Returns to the "Audio SETUP" screen. ⁄ • When you select a speaker type on the Speaker Set Up screen, the crossover frequency setup is cleared. • During crossover setup, the speaker type is set to "User" 68 DNX8120/DDX812/DDX8032BT