Kenwood DPX-7000DAB Operation Manual - Page 32

INSTALLATION / CONNECTION Wiring connection Antenna terminal Rear/ Front/ Subwoofer output For 3-way crossover: Tweeter/ Mid Range/ Woofer output DAB antenna jack ( 6) To front speaker (left) / For 3-way crossover: Mid range speaker (left) To front speaker (right) / For 3-way crossover: Mid range speaker (right) To rear speaker (left) / For 3-way crossover: Tweeter (left) To rear speaker (right) / For 3-way crossover: Tweeter (right) White White/Black Gray Gray/Black Green Green/Black Purple Purple/Black Ignition switch Car fuse box Red (Ignition wire) Car fuse box Battery 32 Yellow (Battery wire) Black (Ground wire) To the metallic body or chassis of the car Fuse (10 A) Microphone input jack ( 14) IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. If no connections are made, do not let the wire come out from the tab. Brown (Mute control wire) To connect the Kenwood navigation system, refer your navigation manual Blue/White (Power control wire/ Antenna control wire) To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle Light blue/yellow (Steering remote control wire) To the steering wheel remote control adapter