Kenwood DPX-7000DAB Operation Manual - Page 5

GETTING STARTED Default: XX DISPLAY EASY MENU When entering [FUNCTION]... ON: ZONE1 and ZONE2 illuminations change to white color. ; OFF: ZONE2 illumination changes to white color while ZONE1 illumination remains as [COLOR SELECT] color. ( 24) (Refer to the illustration on page 23 for zone identification.) TUNER SETTING DAB L-BAND ON: Receives L-BAND ensemble during digital audio reception. ; OFF: Cancels. DAB ANT POWER ON: Supplies power to the DAB antenna. Selects when using the supplied antenna. ; OFF: Does not supply power. Selects when using passive antenna without booster. ( 33) PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM/ SW1/ SW2/ DB1/ DB2/ DB3). ; MIX: Memorizes one station for each preset button, regardless of the selected band. SYSTEM KEY BEEP* ON: Activates the keypress tone. ; OFF: Deactivates. SOURCE SELECT PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 13) BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 10) CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No sound can be heard if an audio file disc is played. * Not applicable if 3-way crossover is selected. F/W UPDATE UPDATE SYSTEM/ UPDATE DAB1/ UPDATE DAB2 F/W UP xx.xx/ F/W UP xxxxx/ F/W UP Vxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/ FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels. CLOCK CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. ENGLISH ESPANOL Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected. Change the crossover type 1 Press repeatedly to enter STANDBY. 2 Press and hold number buttons 4 and 5 to enter crossover select. The current crossover type appears. 3 Turn the volume knob to select "2WAY" or "3WAY", then press the knob. 4 Turn the volume knob to select "YES" or "NO", then press the knob. The selected crossover type appears. • To cancel, press and hold . • To adjust the selected crossover settings, ( 22). Caution Select a crossover type according to how the speakers are connected. ( 32) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low. ENGLISH 5