Kenwood DPX-MP4070 Instruction Manual - Page 11
Subwoofer Output, SRS WOW Select, TEL Mute, Audio Control
View all Kenwood DPX-MP4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Audio Control 1 Enter the Audio Control mode Press the [AUD] button for at least 1 second. "AUD mode" is displayed. 2 Select the Audio item for adjustment Press the [FM+] or [AM-] button. Each time the button is pressed, the items that can be adjusted switch as shown below. 3 Adjust the Audio item Press the [4] or [¢] button. Adjustment Item Display Balance "BAL" Fader "FAD" Sub woofer level*¹ "SubW" Bass boost level*² "AmpB" Central frequency boost*² "AmpF" Low Pass Filter*¹ "LPF" Volume offset "V-OFF" Range Left 15 - Right 15 Rear 15 - Front 15 -15 - +15 Flat/+6/ +12/ +18 (dB) Normal/ Low Through/120/80/50 Hz -8 - ±0 • *¹ You can control this item when 'Subwoofer Output' (page 11) is set to "SubW On". • Volume offset: Each source's volume can be set as a difference from the basic volume. • *² - Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit. - For amplifiers there are the model that can be set from Flat to +18 dB, and the model that can be set from Flat to +12 dB. When an amplifier that can only be set to +12 is connected to the unit, "AmpB +18" won't work correctly even if it's selected. 4 Exit the Audio Control mode Press the [AUD] button. Subwoofer Output Turning the Subwoofer output ON or OFF. Press the [AM-] button for at least 1 second. Each time the button is pressed Subwoofer output switches ON or OFF. When it's ON, "SubW On" is displayed. • You can control this function when 'Switching preout' (page 25) is set to "SWPRE SW". TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. SRS WOW Select You can play back adding gorgeous heavy bass to the sound and making a 3D sound field. 1 Enter the WOW Select mode Press the [WOW] button. "WOW SEL" is displayed. 2 Select the WOW item Press the [WOW] button. Each time the button is pressed, the SRS WOW Select switch as shown below: SRS WOW Moves the sound image up a notch and adjusts bass and the sound field. Moves the sound image up two notches and adjusts bass and the sound field. Changes to the value set in 'SRS WOW Control'. Returns to the normal sound without SRS WOW. Display "Low" "High" "User" "Off" • When operation stops for 3 seconds, the SRS WOW Select closes. • WOW: TruBass, FOCUS and SRS 3D are all set to values shown below. SRS WOW High Low Off SRS FOCUS High Low Off SRS TruBass SRS 3D On On On On Off Off English | 11