Kenwood DPX-MP4070 Instruction Manual - Page 25

In Standby mode Illumination Color Mode Setting the Illumination Color Mode of your display. Display "COL Sync" "COL Fix" Setting The color of your display changes from one color to another during volume adjustment and during Attenuator being ON. Fix the color set. In Standby mode Switching preout Switching the preout between the rear and subwoofer. (In subwoofer it outputs without effect from the fader control.) Display "SWPRE R" "SWPRE SW" Setting Rear preout. Subwoofer preout. ...... In Standby mode Contrast Adjustment Adjusting the display contrast. Display and Setting "CONT 1" "CONT 6" (Original setting) "CONT 11" In Standby mode Opening Demonstration Setting the Demonstration when Power is turned ON. Display "Open On" "Open Off" Setting Demonstration is carried out when Power is turned ON. Demonstration is not carried out when Power is turned ON. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP On" "BEEP Off" Setting Beep is heard. Beep canceled. In Standby mode Equalizer mode Setting the method of adjusting Equalizer types. Display "EQ EASY" "EQ PRO" Setting The effects of Equalizer type can be adjusted among 3 levels. Equalizer types can be adjusted by Bass, Middle, and Treble. English | 25