Kenwood DPX503 Instruction Manual - Page 29

About HD Radio (Optional) When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. With the HD Radio tuner, you can use the similar functions of Tuner features. Refer to Tuner features for how to use the functions. For operating KCA-BT100 (Optional) However, the following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction. 1-3. Operation is the same. Refer to the instruction manual of KCA-BT100. 4. Press the Control knob. 5. Select "YES" using the Control knob. 6. Press the Control knob. 7. Press the [FNC] button. For how to operate Menu, refer to in this instruction manual. About display Cell-Phone Status is displayed in the status display of this unit. Moreover, some displays are different from the description of KCA-BT100 Instruction Manual. Displays of KCA-BT100 Instruction Actual displays on this unit Manual "Disconnect" "HF Disconnect" "Connect" "HF Connect" "Phone Delete" "Device Delete" "Phone Status" "BT DVC Status" BT : Displays the bluetooth connection status. This indicator turns on when a cell-phone is connected to this unit. Function Control Glossary • SRC Select Setting up the Source Select mode. 1 : Displays source icons for your choice. 2 : Allows you to select sources one after another. • Display If this unit is not operated at least 5 seconds with "OFF" selected, the display turns off. During a setup mode, the display will not turn off even if 5 seconds lapse. • ILM Dimmer (illumination dimmer) Reduces the key Illumination brightness. AUTO: Dims the illumination in conjunction with the Light switch of the vehicle. MNAL: Dims the illumination constantly. OFF: Does not dim the illumination. • AT COL CHG (Automatic illumination color change) Selecting "iPod" changes the key illumination automatically according to the color of the iPod body during playback of the iPod source. * The color of key illumination is only a recommended color by our campany. It does not necessarily match the body color of iPod. Compatible iPod models: iPod (5th generation), iPod classic, iPod touch, iPod nano (1st/2nd/3rd generation), Fifth Generation iPod (iPod with video) • SWPRE (Switching Preout) Switches the preout between rear output ("Rear") and subwoofer output ("Sub-W"). • AMP Selecting "OFF" turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. • Zone2 (Dual Zone) Set the destination (front speaker "Front" or rear speaker "Rear") of the sub source (AUX IN) when the Dual Zone function is turned on. • Supreme Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. • Receive Mode (Receive mode Setting) Sets the receive mode of the HD Radio. Auto: Automatically tunes to analog broadcast when there is no digital broadcast. Digital: Digital broadcasts only. Analog: Analog broadcasts only. • CD Read Sets the method for reading CD. When unable to play special format CD, set this function to "2" to force playing. Note that some music CD may be unplayable even when set to "2". In addition, audio files cannot be played when set to "2". Normally, keep this set to "1". 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD. English | 29